87251304.
87251304.
87251304.
87251304.030 Page 1 Thursday, July 23, 1998 16:09 Getting started Before you use your portable for the first time, see “Safety information” on page 32. You should also charge its battery pack overnight in the rear charger slot (see “All about batteries and recharging” on page 28).
87251304.030 Page 2 Thursday, July 23, 1998 16:09 Note: The three buttons directly below your portable’s display are called softkeys. Their labels appear on the display with an underline above the button to which they are assigned. A softkey label is shown like this in this user guide: REDIAL. Setting your portable to ring To set your portable to one of the three ringing options, select the top (»), middle («), or bottom (‚) position of the control switch.
87251304.030 Page 3 Thursday, July 23, 1998 16:09 Answering a call If the flap is already open, press ANSWER or Ò. If the flap is closed, open it. If the flap is closed and the headset is connected, press ANSWER. If Flap Closed operation is turned on, press ANSWER or open the flap. Accessing features during a call To access the menu while on a call, press Ï, then select the appropriate softkey.
87251304.030 Page 4 Thursday, July 23, 1998 16:09 ◊ µ ´ Ò Ï Î Í Vibrator indicator Mute button End button Line button Menu button Telephone directory button System button Making two calls in a row Leave the flap open, press NEXT after your first call. The portable maintains its radio connection for another call. Keeping your connection To maintain your call, stay in the radio coverage area. If you have problems with your connection, retrace your steps.
7251304.030 Page 5 Thursday, July 23, 1998 16:09 Redialing last number Your portable is set up so that you can redial the last number you dialed by pressing REDIAL when it appears. Dialing the last caller You can view the names of the last two callers when LAST appears on the display. Press LAST and ’ or ”to view the names. Press ˘to view the number. Press DIAL to call the number or ERASE to delete the number. To add the name to the Directory, press SAVE.
87251304.030 Page 6 Thursday, July 23, 1998 16:09 Adjusting the ringing volume When the phone is ringing you can adjust the ringing volume with the volume switch. The ringing volume can only be adjusted when the control switch is in the top (») position. When the phone is not ringing, use the Menu to access the volume adjustment levels. to increase volume, press here to reduce volume, press here Using more than one system 6 You can use your portable with up to six Companion systems.
87251304.030 Page 7 Thursday, July 23, 1998 16:09 Note: If your portable has not been registered, the display shows No systems selected when you open the flap. If you wish to register to more systems or are having trouble with your registration, call the contact for your system. Flap closed operation You can make and receive calls with the portable’s flap closed. To enable Flap closed operation, press Ï, then ” or ’, and select Flap Closed:On. When an incoming call rings on the portable, press ANSWER.
87251304.030 Page 8 Thursday, July 23, 1998 16:09 Using your personal directory Your portable has an alphabetical directory that allows you to store up to 50 entries for telephone numbers, feature codes, or both. Moving through the directory Once you have stored directory entries, you can move through them quickly by pressing the first letter of the entry you want. For example to look at listings under D, press Î, then £; to enter E, press Î, then ££.
87251304.030 Page 9 Thursday, July 23, 1998 16:09 3. Enter the first letter of the name by pressing the button that has the letter you want. For example to enter A, press ™; to enter B, press ™™. 4. Enter the rest of the letters as shown in step 3. Use ˘ to move the cursor forward if the next letter you want is on the same button, or select SPACE to insert a space. 5. When the name is complete, press SAVE.
87251304.030 Page 10 Thursday, July 23, 1998 16:09 Deleting an entry 1. Press Î, then ’ or ”. 2. Press ERASE. The display will ask Erase item? 3. Press OK. The display will show Item erased. (Select CANCEL if you do not want to erase the entry.) 4. Press ´ or Î. Dialing from the directory Press Î, ’ or ”, DIAL. Pause and link signal When adding a directory item or customizing a softkey, you may need to insert a pause or a link signal.
87251304.030 Page 11 Thursday, July 23, 1998 16:09 To insert a link signal, press Ï and select Link signal. The display shows L. (Refer to Using your C3050 Portable feature reference card for information on using this feature).
87251304.030 Page 12 Thursday, July 23, 1998 16:09 Using your headset Using one of the optional headsets frees both hands for other tasks. With the handset flap closed and the ringer control switch at the » or « position, you can answer calls and make calls from your directory or by using your customized softkeys. Hint: Using the portable with the C3050 holster protects it from falls. Using the holster with the headset also allows you complete freedom of movement while you are on a call.
87251304.030 Page 13 Thursday, July 23, 1998 16:09 Using your portable with the headset To answer a call, press ANSWER. To end a call, press END. Note: If you wear a hearing aid, you should use the C3002 headset. Note: In particularly noisy environments you should use the C3002 headset.
87251304.030 Page 14 Thursday, July 23, 1998 16:09 Customizing your portable Hint: Whenever you are searching through a list, you can press the first letter of the feature, directory, or system entry you want. If there is more than one entry under a letter, press ” to keep looking. To customize your portable, use the Menu, which contains a number of features in alphabetical order. Moving through the Menu To search through the available options on the Menu press Ï, ’ or ”.
87251304.030 Page 15 Thursday, July 23, 1998 16:09 Discrete Ring If you want your portable to ring once, press Ï, ’ or ”, Discrt ring: ON, ´. Set the ringer control switch to the middle («) position. To prevent your portable from ringing, set the ringer control switch to the middle («) position and press Ï, ’ or ”, Discrt ring: OFF, ´. Hint: To stop the ringing or vibrating during an incoming call press µ. Key Click With Key click turned on, you hear a short beep each time you press a button.
87251304.030 Page 16 Thursday, July 23, 1998 16:09 Key protect Press Ï, ’ or ”, select Key-protect, and select ON or OFF . When Key-protect is turned on, press START to activate softkeys or buttons on the portable. Hint: If you are using a headset or flap closed operation is turned on, you may want to turn Key-protect on. Language Press Ï, select Language, press ˘, then ’ or ” to move between the In English and En français selections. Press SELCT or SÉL, to select your choice.
87251304.030 Page 17 Thursday, July 23, 1998 16:09 Choosing distinctive ringing 1. Press Ï, ’ or ”. 2. Select Ring types. 3. Press ˘, ’ or ” (to hear samples). 4. Press SELCT to choose a new ring type, ´. Setting the ringing volume 1. Press Ï, ’ or ”. 2. Select Ringer volume. 3. Press ˘, ’ or ”, (to hear samples). 4. Press SELCT to choose a new ring volume, ´. Setting the portable to vibrate and ring 1. Press Ï, ’ or ”. 2. Select Vibrator: ON. (The display shows ◊, and the portable vibrates briefly.
87251304.030 Page 18 Thursday, July 23, 1998 16:09 Setting the portable to vibrate only 1. Press Ï, ’ or ”. 2. Select Vibrator: ON. (The display shows ◊, and the portable vibrates briefly.) And to keep your portable from ringing: 3. Press ’ or ”, select Discrt ring: OFF, press ´. 4. Set the ringer control switch to the middle («) position.
87251304.030 Page 19 Thursday, July 23, 1998 16:09 Extra features System features If your system supports features such as Call Forward or Call Transfer, you can customize your directory to include them (see “Storing directory entries” on page 8, “Customizing softkeys” on page 23, and Using Your C3050 Portable feature reference card, or you can call your contact). Long tones To select long tones press Ï, ’ or ”, Long tones: ON, ´.
87251304.030 Page 20 Thursday, July 23, 1998 16:09 Message waiting Some systems allow your portable to display Message waiting if you have a voice mail message. Even if your system does not support Message Waiting indication, you can set up your portable to dial directly into your voice mailbox. See “Message Service”. Message Service By first storing a message service code, you can access the voice mail system by pressing MAIL. Press PLAY to listen to the message and NEXT to move on to the next message.
87251304.030 Page 21 Thursday, July 23, 1998 16:09 Depending on your voice mail system, you may be required to change the dial codes. Dial codes are the numbers used to access voice mail system features. For example, the default dial code 76 deletes a message. If your voice mail system is Meridian Mail, you do not have to change the dial codes. If you change your message service code, you will have to change the dial codes as required. To store your message service code 1. Press Ï, ’ or ”. 2.
87251304.030 Page 22 Thursday, July 23, 1998 16:09 5. The display shows Dialcodes? Note: Dialcodes? is only displayed after you first store the message service code. If you erase your message service code, you will have to go through dial codes again and change as required. Hint: For most Meridian Voice Mail systems, select DEFAULT. For Norstar Companion systems that support integrated voice mail, select NO.
87251304.030 Page 23 Thursday, July 23, 1998 16:09 Customizing softkeys For direct, one-touch access to frequently used features or frequently called numbers, use your softkeys. Your customized idle softkeys are available when the portable is not in use. You can also customize an active softkey that is available while you are on a call. The default idle softkeys are REDIAL, MAIL and LAST. Message Service must be programmed for the MAIL softkey. The default active softkey is NEXT.
87251304.030 Page 24 Thursday, July 23, 1998 16:09 5. If you want to add a feature to your softkey, press Ï. If you want to add an entry from your directory, press Î. If you would like to add a system selection, press Í. 6. Press ’ or ” to move to the desired entry, then press SELCT. 7. Label your softkey with up to four characters by pressing the button that has the letter you want. For example to enter A, press ™; to enter B, press ™™. 8. Press SAVE, ´.
87251304.030 Page 25 Thursday, July 23, 1998 16:09 Administration features Features such as Feature request and Portable Info are only useful for your system contact.
87251304.030 Page 26 Thursday, July 23, 1998 16:09 Making your portable secure When your portable is not in use, you can lock its dialpad with your personal identification number (PIN). When the portable is locked, the display shows q. Entering a PIN for the first time 1. Press Ï, ’ or ”, Security: PIN, (enter a 1- to 6-digit PIN). 2. Press DONE, (enter new PIN again), DONE. Changing a PIN 1. Press Ï, ’ or ”, Security: PIN, (enter old PIN). 2. Press DONE, (enter a 1- to 6-digit PIN). 3.
87251304.030 Page 27 Thursday, July 23, 1998 16:09 Unlocking your portable Press Ï, ’ or ”, select Security: OFF, (enter PIN), DONE. Note: If you lose or forget your PIN and your portable is locked, enter the master PIN supplied with your portable. Be careful when you enter the master PIN. The display asks if you want to Clear everything. If you want to keep all of your settings, select NO. The PIN previously stored will be cleared.
87251304.030 Page 28 Thursday, July 23, 1998 16:09 All about batteries and recharging Important battery information Before using your rechargeable battery pack for the first time, it must be charged in the rear charger slot for at least 8 hours. This is necessary to ensure full battery life. Your portable needs a rechargeable battery pack. Battery level is shown by the / symbol on the top right of the display. If the batteries are very low, the display flashes ¿ and you hear warning beeps.
87251304.030 Page 29 Thursday, July 23, 1998 16:09 Installing battery packs Hook the hinges of the battery pack into the slots at the bottom of your portable, and push the pack and the portable together until the pack clicks shut. Preparing the charger Connect the ac adaptor plug of the power cable to the rear of the charger, then attach the ac adaptor to a power source.
87251304.030 Page 30 Thursday, July 23, 1998 16:09 Hint: In high usage environments it is a good idea to have a spare battery pack. Alternating the spare battery pack between charges will prolong battery life. AAA batteries You can also use an optional AAA battery holder with your portable. Insert the batteries into the battery holder. Note: Commercially available AAA NiCd batteries cannot be charged in the C3050 HiCapacity Charger.
87251304.030 Page 31 Thursday, July 23, 1998 16:09 Accessories for your portable There are a number of C3050 accessories available from your Nortel distributor. • C3001 Ear Bud Headset a small and lightweight ear-bud type headset • C3002 Over-the-head Headset a full over-the-head band for extra stability and hold with a single earpiece. • C3050 Clip-on Holster a custom-designed holster with an adjustable belt clip.
87251304.030 Page 32 Thursday, July 23, 1998 16:09 Safety information Electromagnetic energy safety Hazardous conditions may arise if the portable telephone is operated near construction blasting caps or near emergency service radio receivers. Do not use this portable telephone in locations bearing warning signs that caution against radio transmission.
87251304.030 Page 33 Thursday, July 23, 1998 16:09 Charge the battery pack provided with the portable only in accordance with the instructions specified in this manual. Do not short circuit batteries. Batteries may explode when short circuited. Antenna safety The C3050 portable telephone emits low levels of radio energy.
87251304.030 Page 34 Thursday, July 23, 1998 16:09 Note for pacemaker users Although the risk of interference is minimal, pacemaker users should not store the C3050 portable in a pocket next to the pacemaker. Note for hearing aid users Use of the portable telephone may produce an audible tone within a hearing aid. The C3002 headset can be used with hearing aids and will prevent the occurrence of the audible tone.
87251304.030 Page 35 Thursday, July 23, 1998 16:09 Technical specifications Voltage 3.6 V rechargeable batteries 4.5 V (total voltage rating), three AAA alkaline batteries Frequency band 1.920 to 1.
87251304.030 Page 36 Thursday, July 23, 1998 16:09 Regulatory compliance PCI CAI:FCC Etiquette This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1). This device may not cause harmful interference, and 2). This device must accept any interference received, including interference that may cause undesired operation.
87251304.030 Page 37 Thursday, July 23, 1998 16:09 Caring for your portable Temperature extremes Avoid subjecting the portable telephone to extremes in temperature. Care and maintenance Clean the portable telephone by wiping it with a damp cloth. Do not use solvents or polishes. If your portable telephone does not work, check all charging contacts on the portable and the charger for dirt, grease, or other material. If necessary, clean them with a soft dry cloth.
87251304.
87251304.040 Page 1 Thursday, July 23, 1998 16:17 E Printed on recycled paper © 1997 Northern Telecom All rights reserved. Companion is a trademark of Northern Telecom.
