DIGITAL CAMERA User’s Manual En
Trademark Information • Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. • Adobe and Acrobat are registered trademarks of Adobe Systems Inc. • SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC. • PictBridge is a trademark. • HDMI, logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Introduction First Steps Basic Photography and Playback: A (Auto) Mode More on Shooting More on Playback Editing Pictures Movie Recording and Playback Connecting to Televisions, Computers and Printers Basic Camera Setup Caring for the Camera Technical Notes and Index i
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
For Your Safety Observe caution when handling the battery The battery may leak or explode if improperly handled. Observe the following precautions when handling the battery for use in this product: • Before replacing the battery, turn the product off. If you are using an AC adapter, be sure it is unplugged. • Use only a Rechargeable Li-ion Battery EN-EL14 (supplied). Charge the battery by inserting it in a Battery Charger MH-24 (supplied).
For Your Safety Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Handle moving parts with care Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts. CD-ROMs The CD-ROMs supplied with this device should not be played back on audio CD equipment.
Notices Notices for Customers in the U.S.A. IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS. DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. The power supply unit is intended to be correctly orientated in a vertical or floor mount position.
Notices Notice for Customers in the State of California WARNING Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064 USA Tel: 631-547-4200 Notice for Customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003.
Table of Contents For Your Safety ........................................................................................................................................ ii WARNINGS .................................................................................................................................................................. ii Notices .......................................................................................................................................................
Table of Contents Basic Photography and Playback: A (Auto) Mode............................................................... 24 Step 1 Turn the Camera On and Select A (Auto) Mode........................................................24 Indicators Displayed in A (Auto) Mode ...............................................................................................25 Step 2 Frame a Picture...................................................................................................................
Table of Contents Checking the Picture Brightness Distribution (A, B, C, D Modes) ..................................82 Selecting the Focus Area (A, B, C, D Modes)..........................................................................84 Focusing on Moving Subjects for Shooting (Subject Tracking) .............................................88 Shooting Options: Shooting Menu (A, B, C, D Modes) ......................................................90 Picture Control (COOLPIX Picture Control) ...............
Table of Contents Editing Pictures ................................................................................................................................133 Picture Editing Functions ............................................................................................................... 133 Editing Pictures.................................................................................................................................. 135 k Quick Retouch: Enhancing Contrast and Saturation .
Table of Contents Basic Camera Setup ........................................................................................................................167 Setup Menu......................................................................................................................................... 167 Welcome Screen ............................................................................................................................................... 169 Date................................
Table of Contents Technical Notes and Index ...........................................................................................................199 Optional Accessories ....................................................................................................................... 199 Using Speedlights (External Flash Unit).............................................................................................. 202 File and Folder Names.....................................................
Introduction About This Manual Introduction Thank you for your purchase of Nikon COOLPIX P7000 digital camera. This manual is written to help you enjoy taking pictures with your Nikon digital camera. Read this manual thoroughly before use, and keep it where all those who use the product will read it.
Information and Precautions Life-Long Learning Introduction As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.
Information and Precautions Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. Introduction • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample”.
Parts of the Camera Camera Body Built-in flash raised Introduction 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 21 22 12 24 25 26 Power connector cover (for connection with an optional AC Adapter)............199 1 Eyelet for camera strap .............................15 2 Exposure compensation dial................. 43 3 Exposure compensation dial mark....43 4 Power switch/power-on lamp... 19, 181 5 Mode dial...........................................................
Parts of the Camera Bottom of camera 1 2 3 4 5 6 7 8 9 10 11 Introduction 19 12 13 14 15 16 17 18 20 21 22 23 24 1 External microphone connector ..... 146 13 Monitor ..................................................6, 14, 25 2 Eyelet for camera strap .............................15 14 Infrared receiver (rear)................................39 3 K (Flash pop-up) button.....................33 15 d button......13, 45, 91, 123, 149, 168 4 Diopter adjustment control...................
Parts of the Camera Monitor Introduction Press the x (monitor) button to switch between displaying and hiding information (A14). The displayed information varies according to the camera settings and condition. Shooting 2 44 43 6 4 5 45 7 14 1 10 11 89 3 12 15 42 13 16 19 39 41 40 20 37 38 36 1/250 F5.6 35 30 999 21 18 22 28 33 32 31 23 29 24 34 17 999 9999 1m00s 1m00s a b 25 26 27 46 47 1/250 F5.6 49 48 1/250 6 1342 F5.6 1342 1/250 F5.6 1342 50 1/250 F5.
Parts of the Camera 2 3 4 5 6 7 8 9 10 11 12 13 Shooting mode1 .............................24, 44, 45, 58, 60, 112, 146 Focus mode......................................................40 Zoom indicator ..............................................27 AE/AF-L indicator..........................................57 Zoom memory....................................11, 107 Zoom speed setting.................................179 Flash mode .......................................................32 Speedlight.......
Parts of the Camera Playback Introduction 1 22 21 20 19 18 24 23 2 3 4 5 15/11/2010 12:00 9999.JPG 6 7 17 16 15 14 8 999/999 9 10 11 12 13 999/999 9999/9999 a b 1 Date of recording......................................... 20 12 Voice memo playback guide ............. 132 2 Time of recording ........................................ 20 13 Movie playback guide............................ 151 3 Protect icon....................................................129 14 List by date guide....
Basic Operations Command Dial Introduction You can rotate the command dial to select items from a menu screen or to set any of the following functions.
Basic Operations Quick Menu Dial and Quick Menu Button Introduction Rotate the quick menu dial to align the mark with the function that you want to set. Items such as a (image quality and image size) can be set. • When the quick menu button is pressed while shooting, the setting menu (quick menu) is displayed for the function that is selected with the mark. • When e is chosen, the “Tone level information” (A82) function is turned on with the quick menu button.
Basic Operations g (AE-L/AF-L) Button Introduction When shooting still pictures, instead of pressing the shutter-release button halfway, you can use the AE-L/AF-L button to shoot with focus lock (A29). • The exposure and focus are locked while the AE-L/AF-L button is pressed. Fully press the shutter-release button to release the shutter with the locked exposure and focus (default setting).
Basic Operations Rotary Multi Selector Introduction Operate by rotating the rotary multi selector, pressing up (H), down (I), left (J) or right (K) on the rotary multi selector, or pressing the k button.
Basic Operations d Button Introduction Press the d button to display the menu and to select options for the menu items. • Use the rotary multi selector to navigate the menus (A12). • Menu items can also be chosen by rotating the command dial. • Select a tab on the left end of the monitor to display the corresponding menu (A14). • Press the d button again to exit the menu. Displayed when the menu contains two or more pages This tab displays the available menus in the mode selected with the mode dial.
Basic Operations Switching Between Tabs in the Menu Screen In the menu screen that is displayed when the d button is pressed (A13), choose the left end tab to switch to the menu of the chosen tab. Introduction Shooting menu Shooting menu Picture Control Custom Picture Control Metering Continuous Autofocus mode Flash exp. comp. Noise reduction filter Picture Control Custom Picture Control Metering Continuous Autofocus mode Flash exp. comp.
Basic Operations C Introduction 1 Available when the mode dial is set to A, B, C, D, E, F or N. 2 The shutter does not click when the focus is not locked and the AF lamp does not light up. 3 For details about the tone level information, see “Checking the Picture Brightness Distribution (A, B, C, D Modes)” (A82).
First Steps Charging the Battery Charge the Rechargeable Li-ion Battery EN-EL14 (supplied) using the Battery Charger MH-24 (supplied). 1 Prepare the Battery Charger MH-24. First Steps If a plug adapter* is included, attach the plug adapter to the plug on the Battery Charger. Push the plug adapter firmly until it is securely held in place. Attempting to forcibly remove the plug adapter could damage the product.
Charging the Battery CHARGE lamp B Battery charging. On Battery fully charged. Flickers • The battery is set incorrectly. Disconnect the Battery Charger from the electrical outlet, remove the battery, and then reset the battery to lie flat in the Battery Charger. • Operating temperature range exceeded. Charge the battery indoors while the ambient temperature is 5°C to 35°C (41°F to 95°F). • The battery is faulty. Immediately disconnect the Battery Charger from the electrical outlet, and stop charging.
Inserting the Battery Insert a Rechargeable Li-ion Battery EN-EL14 (supplied) into the camera. • Charge the battery before first use or when the battery is running low (A16). 1 Open the battery-chamber/memory card slot cover. First Steps • Slide the cover latch to the Y side (1), and open the cover (2). 2 Insert the battery (supplied). • Confirm that the positive (+) and negative (–) terminals are oriented correctly, as shown on the label at the entrance of the battery chamber, and insert the battery.
Inserting the Battery Removing the Battery First Steps Before opening the battery-chamber/memory card slot cover, turn the camera off (A19) and confirm that the power-on lamp and the monitor are off. To eject the battery, open the battery-chamber/memory card slot cover and slide the battery latch in the direction shown (1). Then, remove the battery straight (2). • Note that the battery or memory card may become hot during use; observe due caution when removing the battery.
Setting the Display Language, Date and Time Dialogs for language selection and camera clock setting are displayed the first time the camera is turned on. 1 Press the power switch to turn on the camera. First Steps 2 Use the rotary multi selector to choose the desired language and press the k button. • For information on using the rotary multi selector, see “Rotary Multi Selector” (A12). 3 Choose Yes and press the k button. • If No is selected, the date and time are not set.
Setting the Display Language, Date and Time 5 Set the date and time. Date 6 Finally, choose DMY, and apply the selection by pressing the k button or K. D M Y 01 01 2010 00 00 Edit First Steps • To choose an item: Press K or J (selected in the following order: D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝ DMY (date display order)). • To set the contents: Rotate the rotary multi selector, or press H or I.
Inserting the Memory Card The recorded data is stored in the camera’s internal memory (approx. 79 MB) or on commercially available Secure Digital (SD) memory cards (A221). If a memory card is inserted in the camera, data is automatically stored on the memory card, and data recorded to the memory card can be played back, deleted, or transferred. To use the internal memory, remove the memory card.
Inserting the Memory Card B Formatting a Memory Card B The Write Protect Switch Memory cards are equipped with a write protect switch. When this switch is in the “Lock” position, data cannot be written to, or deleted from, the memory card. If you want to record data, delete data or format the memory card, and the switch is in the “Lock” position, slide the switch to its original position to unlock it. B First Steps Card is not formatted.
Basic Photography and Playback: A (Auto) Mode Step 1 Turn the Camera On and Select A (Auto) Mode This section describes how to take pictures in A (auto) mode, an automatic, “pointand-shoot” mode recommended for first-time users of digital cameras. 1 Press the power switch to turn on the camera. • The lens extends, and the monitor is turned on. Basic Photography and Playback: A (Auto) Mode 2 Rotate the mode dial to A. 1/250 3 Check the battery level and number of exposures remaining on the monitor.
Step 1 Turn the Camera On and Select A (Auto) Mode Indicators Displayed in A (Auto) Mode Shooting mode A is displayed in A (auto) mode. 1/250 F5.6 32 Aperture value (A61) Internal memory indicator Pictures are recorded to internal memory (approx. 79 MB). When a memory card is inserted, C is not displayed and pictures are recorded to the memory card. Image quality/image size The current image quality (compression) and image size are displayed.
Step 2 Frame a Picture 1 Ready the camera. • Hold the camera steadily in both hands. • Keep your fingers, hair, strap and other objects away from the lens, flash, AF-assist illuminator, microphone and speaker. • When using the flash (A32) to shoot in the “tall” orientation, hold the camera so that the flash is above the lens. Basic Photography and Playback: A (Auto) Mode 2 Frame the picture. • Position the main subject near the center of the monitor. 1/250 F5.
Step 2 Frame a Picture Using the Zoom Zoom out Rotate the zoom control to activate the optical zoom. Rotate in the g direction to zoom in so that the subject fills a larger area of the frame. Rotate in the f direction to zoom out so that the area visible increases in the frame. • A zoom indicator is displayed at the top of the monitor when the zoom control is rotated.
Step 3 Focus and Shoot 1 Press the shutter-release button halfway. • When the button is pressed halfway (A10), the camera focuses. • The camera automatically focuses on the subject in the center focus area. When the subject is in focus, the focus area lights in green, and the AF lamp next to the viewfinder lights. Basic Photography and Playback: A (Auto) Mode 1/250 • When the digital zoom is in effect, the camera focuses on the subject in the center of the screen, and the focus area is not displayed.
Step 3 Focus and Shoot B During Recording While the AF lamp or the indicator showing the number of exposures remaining is blinking, images are being recorded. Do not open the battery-chamber/memory card slot cover. Cutting the power or removing the memory card in these circumstances could result in loss of data or in damage to the camera or card. B Autofocus D Focus Lock Use focus lock to focus on off-center subjects when Center is selected for AF area mode.
Step 4 Viewing and Deleting Pictures Viewing Pictures (Playback Mode) Press the c (Playback) button. Basic Photography and Playback: A (Auto) Mode c (Playback) button • The last picture shot is displayed in fullframe playback mode. • Rotate the rotary multi selector, or press H, I, J or K to view previous or subsequent pictures. Continue holding down H, I, J or K to fast forward pictures. Pictures can also be chosen by rotating the Rotary multi selector command dial.
Step 4 Viewing and Deleting Pictures Deleting Unnecessary Pictures 1 Use the rotary multi selector to choose Yes and press the k button. • The picture that is deleted cannot be restored. • To exit without deleting the picture, choose No and press the k button. B Erase 1 image? Yes No Basic Photography and Playback: A (Auto) Mode 2 Press the l button to delete the picture currently displayed on the monitor.
Using the Flash In dark locations or when the subject is backlit, you can shoot pictures with a flash by raising the built-in flash. You can set a flash mode that suits the shooting conditions. The flash has a range of about 0.5 to 6.5 m (1 ft. 8 in. to 21 ft.) for wide, and about 0.8 to 3 m (2 ft. 8 in. to 9 ft. 10 in.) for tele (when ISO sensitivity is set to Auto). U Auto Flash fires automatically when lighting is poor. V Auto with red-eye reduction Reduces “red-eye” in portraits.
Using the Flash Setting the Flash Mode 1 Press the K (flash pop-up) button. • Built-in flash is raised. • When the built-in flash is lowered, the flash mode is fixed to W (Off ). Basic Photography and Playback: A (Auto) Mode 2 Press m (flash mode) on the rotary multi selector. • The flash mode menu is displayed. 3 Use the rotary multi selector to choose the desired mode and press the k button. • When the manual flash is chosen, choose the flash output with J or K before pressing the k button.
Using the Flash B Shooting When Lighting is Poor or When the Flash is Set to W (Off) • Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of camera shake. When the camera is stabilized with a tripod, set Vibration reduction (A175) to Off in the setup menu (A167). • E may be displayed in the shooting mode. When E is displayed, the ISO sensitivity has increased automatically.
Taking Pictures with the Self-Timer The self-timer is suitable for taking group pictures and reducing the vibration when the shutter-release button is pressed. Timer durations of two or ten seconds can be selected. When using the self-timer, use of a tripod is recommended. Set Vibration reduction (A175) in the setup menu (A167) to Off when using a tripod to stabilize the camera. 1 Press n (self-timer) on the rotary multi selector.
Taking Pictures of Smiling Faces (Smile Timer) The camera detects smiling faces using face detection and releases the shutter automatically. The skin softening function makes a human subject’s skin appear smoother. This can be used when the shooting mode (A44) is A (auto) mode, the Portrait or Night portrait scene mode, or A, B, C, D, E, F, N or O (low noise night) mode. 1 Press n (self-timer) on the rotary multi selector. Basic Photography and Playback: A (Auto) Mode • The self-timer menu is displayed.
Taking Pictures of Smiling Faces (Smile Timer) 5 Press the shutter-release button when the required pictures have been taken. • Automatic shooting ends. • Shooting also ends in the situations below. - When 12 pictures have been taken - When five minutes have passed since pressing the shutter-release button in step 4 and no smiling faces have been detected Notes on Smile timer • The digital zoom is not available.
Shooting with Remote Control Use the remote control ML-L3 (available separately) (A200) to release the shutter. It is convenient for taking self-portraits and effectively eliminates blur caused by camera shake that occurs when the shutter-release button is pressed. • Use of a tripod is recommended during shooting with the remote control. Set Vibration reduction (A175) in the setup menu (A167) to Off when using a tripod to stabilize the camera. 1 Press n (self-timer) on the rotary multi selector.
Shooting with Remote Control 4 Aim the transmitter at the infrared receiver on the front or rear of the camera (A4, 5) and press the send button. Rear Front B Basic Photography and Playback: A (Auto) Mode • Press the send button from a distance of 5 m (16 ft.) or less. • In the quick-response remote mode, once the subject is in focus, the shutter is released.
Using Focus Mode Choose a focus mode according to the subject and composition. A Autofocus The camera automatically adjusts the focus according to the distance to the subject. Use when the distance from the subject to the lens is 50 cm (1 ft. 8 in.) or more, or 80 cm (2 ft. 8 in.) or more at the maximum telephoto position. D Macro close-up Basic Photography and Playback: A (Auto) Mode Use for close-ups of flowers or small objects.
Using Focus Mode Setting the Focus Mode 1 Press p (focus mode) on the rotary multi selector. • The focus mode menu is displayed. Autofocus Use the rotary multi selector to choose the desired focus mode and press the k button. • The mode selected for focus mode is displayed. • When A (Autofocus) is applied, P is only displayed for a few seconds even if monitor indicators (A14) are turned on. • If the k button is not pressed within a few seconds, the selection is set and the setting menu disappears.
Using Focus Mode Using Manual Focus Available when the shooting mode is A, B, C, D, E, F, N or O (low noise night). Select a shooting mode with the mode dial (A44). 1 Press p (focus mode) on the rotary multi selector to display the setup menu for focus mode. Basic Photography and Playback: A (Auto) Mode • Use the rotary multi selector to choose E (manual focus) and press the k button.
Adjusting the Brightness (Exposure Compensation) When exposure compensation is set for shooting, the brightness of the entire image can be adjusted to make it brighter or darker. 1 Select the compensation value by rotating the exposure compensation dial. • To make the subject brighter: adjust the exposure compensation to the “+” side. • To make the subject darker: adjust the exposure compensation to the “–” side. • When set to a value other than 0.
More on Shooting Selecting a Shooting Mode (Mode Dial) When the mode dial is rotated next to the mark, the camera switches to the corresponding shooting mode shown below. 1/250 F5.6 1342 More on Shooting A, B, C, D (A60) D (Movie) mode (A146) Choose these modes for greater control over shutter speed and aperture value. High-definition movies can be shot with sound. y Scene (A45) A Auto mode (A24) An automatic, “point-andshoot” mode recommended for firsttime users of digital cameras.
Selecting Scenes for Shooting (Scene Mode) You can shoot with settings suitable for the scene simply by choosing one of the following scene modes. x Scene auto selector b Portrait c Landscape d Sports e Night portrait f Party/indoor Z Beach z Snow h Sunset i Dusk/dawn j Night landscape k Close-up u Food l Museum m Fireworks show n Copy o Backlighting p Panorama assist Setting the Scene Mode 1 Rotate the mode dial to y. More on Shooting • The camera enters scene mode.
Selecting Scenes for Shooting (Scene Mode) Shooting in the Scene Selected by the Camera (Scene Auto Selector) By simply framing a picture, the camera automatically selects the optimum scene mode for simpler shooting. When the camera is aimed at a subject in x Scene auto selector mode, the camera automatically selects one of the following scene modes.
Selecting Scenes for Shooting (Scene Mode) B Notes on Scene Auto Selector • The digital zoom is not available. • Depending upon shooting conditions, the camera may not select the desired scene mode. Should this occur, switch to A (Auto) mode (A24) or choose the desired scene mode manually (A48). C Focusing in Scene Auto Selector • In scene auto selector, the camera detects and focuses on a face (see “Shooting with Face Priority” (A86) for more information).
Selecting Scenes for Shooting (Scene Mode) Selecting a Scene Mode to Take Pictures (Features) See “Shooting in the Scene Selected by the Camera (Scene Auto Selector)” (A 46) for more information on Scene auto selector scene mode. • The X shown for each scene is the setting for the flash mode when the built-in flash is raised (A32). n is the setting for the self-timer (A35), remote control (A38) and Smile timer (A36), and p is the setting for focus mode (A40).
Selecting Scenes for Shooting (Scene Mode) d Sports Use this mode for dynamic action shots that freeze the action in a single shot and record motion in a series of pictures. With continuous shooting, instantaneous movements of moving subjects can be captured clearly. • The camera focuses on the subject in the center of the frame. The camera continuously focuses using autofocus until you press the shutter-release button halfway to lock the focus.
Selecting Scenes for Shooting (Scene Mode) f Party/indoor Suitable for taking pictures in parties. Captures the effects of candlelight and other indoor background lighting. • The camera focuses on the subject in the center of the frame. • Hold the camera steadily as pictures are easily affected by camera shake. When shooting under low lighting, use of a tripod is recommended. Set Vibration reduction (A175) to Off when using a tripod to stabilize the camera during shooting.
Selecting Scenes for Shooting (Scene Mode) O h Sunset Preserves the deep hues seen in sunsets and sunrises. • The camera focuses on the subject in the center of the frame. X 1 2 U1 n Off2 p A Other settings can be selected. The self-timer and remote control are available. OQ i Dusk/dawn X * W n Off* p More on Shooting Preserves the colors seen in the weak natural light before sunrise or after sunset. • The camera focuses at infinity.
Selecting Scenes for Shooting (Scene Mode) k Close-up Photograph flowers, insects and other small objects at close range. • The focus mode (A40) setting is changed to D (Macro closeup) and the camera automatically zooms to the closest position at which it can focus. More on Shooting • When the F mark on the monitor lights in green (when the zoom indicator is to the wideangle side of the K icon), the camera can focus on subjects as close as about 2 cm (0.8 in.) from the lens.
Selecting Scenes for Shooting (Scene Mode) u Food Use this mode when taking pictures of food. • The focus mode (A40) setting is changed to D (Macro close-up) and the camera automatically zooms to the closest position at which it can focus. 1/250 F5.6 1342 • AF area mode is changed to Manual to enable the focus area to be chosen (A84). Press the k button, and then rotate the rotary multi selector, or press H, I, J or K to move the focus area.
Selecting Scenes for Shooting (Scene Mode) l Museum Use indoors where flash photography is prohibited (for example, in museums and art galleries) or in other situations in which you do not want to use the flash. • The camera focuses on the subject in the center of the frame. • BSS (Best Shot Selector) (A99) can be used for shooting. • As pictures are easily affected by camera shake, be sure that Vibration reduction (A175) is enabled and hold the camera steadily.
Selecting Scenes for Shooting (Scene Mode) o Backlighting Use to “fill-in” (illuminate) shadows and backlit subjects. The flash fires automatically to “fill in” (illuminate) shadows. • Shoot pictures with the built-in flash raised. • The camera focuses on the subject in the center of the frame. X * X n Off* p A The self-timer and remote control are available.
Selecting Scenes for Shooting (Scene Mode) Taking Pictures for a Panorama The camera focuses on the subject in the center of the frame. Using a tripod makes the composition easier. When the camera is stabilized with a tripod, set Vibration reduction (A175) to Off in the setup menu (A167). 1 More on Shooting 2 Rotate the mode dial to y. Press the d button to display the scene menu screen, choose p Panorama assist with the rotary multi selector and press the k button.
Selecting Scenes for Shooting (Scene Mode) 5 Shoot the second picture. • Match the outline of the next picture so that 1/3 of the frame overlaps the previous picture, and press the shutter-release button. • Repeat until you have taken the necessary number of pictures to complete the image. 6 End 1341 End 1339 Press the k button when shooting is completed. • The camera returns to step 3.
Shooting Low-lit Scenes (Low Noise Night Mode) The ISO sensitivity is controlled automatically to a high level. This allows you to capture the atmosphere of a low-lit scene and shoot pictures with a low amount of noise without using the flash. It also reduces the effects of camera shake and subject movement when shooting at the telephoto zoom position. • The available image size is C 2048×1536 or smaller. • The ISO sensitivity is set automatically within the range of ISO 400 to 12800.
Shooting Low-lit Scenes (Low Noise Night Mode) B Notes on Low Noise Night Mode • Although vibration is reduced even in low-lit environments, a tripod is recommended when not using a flash. Set Vibration reduction (A175) to Off when using a tripod to stabilize the camera. • Because the shooting is performed with ISO sensitivity set to a high level, the shot picture may be grainy.
Setting the Exposure for Shooting (A, B, C, D Modes) A, B, C, D Modes By rotating the mode dial, you can shoot pictures in the following four exposure modes: A (Programmed auto), B (Shutter-priority auto), C (Aperture-priority auto), and D (Manual). Not only you can set the shutter speed and aperture value yourself, but you can also select a variety of advanced settings, such as changing the ISO sensitivity and white balance with the quick menu dial (A10, 67).
Setting the Exposure for Shooting (A, B, C, D Modes) D Shutter Speed and Aperture Value The same exposure can be achieved with different combinations of shutter speed and aperture value, allowing you to freeze or blur motion and control depth of field. The following figure shows how shutter speed and aperture value affect exposure. When the ISO sensitivity setting (A74) is changed, the range of shutter speeds and aperture values at which the correct exposure can be obtained also changes. 1/250 F5.
Setting the Exposure for Shooting (A, B, C, D Modes) A (Programmed Auto) Mode The camera sets the shutter speed and aperture value automatically for optimal exposure. 1 More on Shooting 2 Rotate the mode dial to A. 1/250 F5.6 1342 1/500 F4.0 1342 Frame the subject and shoot. • In the default setting, the camera automatically selects one or more of the nine focus areas containing the subject closest to the camera.
Setting the Exposure for Shooting (A, B, C, D Modes) B (Shutter-Priority Auto) Mode The user chooses the shutter speed; the camera selects the aperture value automatically. • The shutter speed can be set in a range from a maximum speed of 1/2000 to eight seconds. 1 Rotate the command dial to choose a shutter speed value. • When the Av/Tv button is pressed, the shutter speed can be set by rotating the rotary multi selector (default setting, A187). 3 More on Shooting 2 Rotate the mode dial to B.
Setting the Exposure for Shooting (A, B, C, D Modes) C (Aperture-Priority Auto) Mode The user chooses the aperture value; the camera selects the shutter speed automatically. 1 2 Rotate the mode dial to C. More on Shooting Rotate the rotary multi selector to choose the aperture value (f/-number). • The aperture value can be set in a range of f/2.8 to 8 (wide-angle side) and f/5.6 to 8 (telephoto side). 1342 1/250 F5.
Setting the Exposure for Shooting (A, B, C, D Modes) D (Manual) Mode The user controls both the shutter speed and aperture value. • The shutter speed can be set in a range from a maximum speed of 1/4000 to 60 seconds. 1 Rotate the command dial to choose a shutter speed value. • At shutter speeds of 1/4 second or slower, the shutter speed indicator turns red (A63).
Setting the Exposure for Shooting (A, B, C, D Modes) 4 Focus and shoot. • In the default setting, the camera automatically selects one or more of the nine focus areas containing the subject closest to the camera. When the subject is in focus, the focus area (active focus area) lights in green (maximum of nine areas) (A84).
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) While shooting in A, B, C, D, E, F and N, you can set the following options. • Quick menu • AF area mode (A84) • Shooting menu (A90) Quick Menu The following functions can be set with the quick menu dial and the quick menu button.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) a Choosing the Image Quality and the Image Size You can set the image quality (compression ratio) and image size to be recorded. Image Quality See “Setting the Image Quality and the Image Size” (A 73) for more information. Choose the compression ratio applied to pictures. Lower compression ratios result in higher quality pictures, but also larger file sizes, limiting the number of pictures that can be recorded.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) C COOLPIX P7000 NRW (RAW) images • The extension of the image taken is “.NRW.” • No editing other than NRW (RAW) processing can be performed for pictures in the NRW (RAW) format. To edit such pictures, first create JPEG pictures using NRW (RAW) processing (A143), and then edit the JPEG pictures. • ViewNX 2 needs to be installed on the computer to be able to view NRW (RAW) images on the computer.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Image Size See “Setting the Image Quality and the Image Size” (A 73) for more information. You can set the JPEG image size (amount of pixels) for pictures recorded with an image quality of Fine, Normal or Basic. The larger the image, the larger the size at which it can be printed or displayed without becoming noticeably “grainy,” limiting the number of pictures that can be recorded.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) C Number of Exposures Remaining The following table lists the approximate number of pictures that can be stored in the internal memory and on a 4 GB memory card, at each combination of Image size (A70) and Image quality (A68) settings. Note that the number of images that can be stored differs depending on the composition of the image (due to JPEG compression).
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) 1 If the number of exposures remaining is 10,000 or more, “9999” is displayed. 2 The print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the number of pixels by the printer resolution (dpi) and multiplying by 2.54 cm (1 in.).
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Setting the Image Quality and the Image Size 1 Rotate the quick menu dial to a and press the quick menu button. • The quick menu is displayed. • Rotate the mode dial (A44) to a setting other than D. 2 Choose the type of Image quality (A68) with the rotary multi selector. 3 Image size 1342 Choose the type of Image size (A70). • Image size cannot be selected when NRW (RAW) is selected for Image quality.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) b Setting the ISO Sensitivity See “Setting the ISO Sensitivity” (A 75) for more information. Setting the ISO sensitivity to a high level enables shooting when the light intensity is low. The higher the ISO sensitivity, the darker the subject that can be shot. Also, using a faster shutter speed for a subject of the same brightness makes it easier to reduce blur caused by camera vibration or subject movement.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Setting the ISO Sensitivity 1 Rotate the quick menu dial to b and press the quick menu button. • The quick menu is displayed. 2 Choose the ISO sensitivity with the rotary multi selector. 3 Auto Minimum shutter speed Choose the minimum shutter speed. • Press the rotary multi selector H to return to the ISO sensitivity setting. 4 ISO sensitivity More on Shooting • Items can also be chosen by rotating the command dial.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) c Matching Image Colors with Colors as Seen with the Naked Eye (White Balance) See “Setting the White Balance” (A77) for more information. More on Shooting The color of light reflected from an object varies with the color of the light source.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Setting the White Balance 1 Rotate the quick menu dial to c and press the quick menu button. • The quick menu is displayed. 2 Choose the type of white balance with the rotary multi selector and press I. 3 Perform fine adjustment of the setting by pressing H, I, J or K.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) C Color Temperature The perceived color of a light source varies with the viewer and other conditions. Color temperature is an objective measure of the color of a light source, defined with reference to the temperature to which an object would have to be heated to radiate light in the same wavelengths.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Preset Manual Use when you want to make pictures shot under unusual lighting conditions (such as lamps with reddish light) look as though they were shot in normal light. Use the procedure below to shoot after measuring the white balance value under the shooting light. • Up to three preset values can be saved: PRE1, PRE2 and PRE3. 1 2 Place a white or gray reference object under the lighting that will be used during shooting.
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) d Continuous Shooting while Changing the Shutter Speed, ISO Sensitivity and White Balance (Bracketing) See “Setting the Bracketing” (A81) for more information. Continuous shooting can be performed while changing the exposure (brightness) automatically with the shutter speed (Tv) or ISO sensitivity (Sv), or multiple pictures can be recorded while varying the white balance (WB).
Changing the Frequently Used Settings for Shooting (A, B, C, D Modes) Setting the Bracketing 1 Rotate the quick menu dial to d and press the quick menu button. • The quick menu is displayed. 2 Choose the type of bracketing with the rotary multi selector and press I. 3 Choose the number of pictures to shoot and press I. • 3 or 5 pictures can be chosen.
Checking the Picture Brightness Distribution (A, B, C, D Modes) “Tone level information” is displayed automatically each time the shutter is released so that you can check the brightness distribution of the shot picture and the shooting information. You can check for loss of contrast detail in highlights and shadows from the histogram that is displayed, or the blinking display for each tone level. These provide guidelines when adjusting the picture brightness with functions such as exposure compensation.
Checking the Picture Brightness Distribution (A, B, C, D Modes) C Histogram and Shooting Information Displays of Tone Level Information • The histogram is a graph that shows the brightness distribution in the picture. The horizontal axis shows the number of pixels, and the vertical axis corresponds to pixel brightness.
Selecting the Focus Area (A, B, C, D Modes) In shooting modes A, B, C, D, E, F, N and O (low noise night), you can change how the camera selects the focus area for autofocus. a More on Shooting w x 84 Face priority The camera automatically detects and focuses on a face (see “Shooting with Face Priority” (A86) for more information). If the camera detects multiple faces, the camera focuses on the face closest to the camera.
Selecting the Focus Area (A, B, C, D Modes) y Center (wide), Center (normal), Center (spot) The camera focuses on the subject in the center of the frame. The center focus area is displayed all the time. Three sizes are available for the focus area. 1/250 F5.6 1342 Focus area s More on Shooting Subject tracking Subject tracking begins once you select a subject to be focused on, and the focus area will move and follow the subject. See “Focusing on Moving Subjects for Shooting (Subject Tracking)” (A88).
Selecting the Focus Area (A, B, C, D Modes) Shooting with Face Priority The camera automatically detects and focuses on a face. The face priority function is enabled for the following situations. • Face priority is selected for AF area mode (A84) • When Scene auto selector (A46), Portrait (A48) or Night portrait (A49) is selected in scene mode • When a (Smile timer) is selected (A36) 1 Frame the picture.
Selecting the Focus Area (A, B, C, D Modes) B Notes on Face Priority More on Shooting • When Face priority is selected for AF area mode, the setting automatically switches to Auto if no face is detected when the shutter-release button is pressed halfway. • If no face is recognized when the shutter-release button is pressed halfway in the Portrait or Night portrait scene mode, the camera focuses on the subject in the center focus area.
Selecting the Focus Area (A, B, C, D Modes) Focusing on Moving Subjects for Shooting (Subject Tracking) To focus on moving subjects, set the autofocus area setting to s (subject tracking) in shooting mode A, B, C, D, E, F, N or O (low noise night). Subject tracking begins once you select a subject to be focused on, and the focus area will move and follow the subject. 1 Press G (AF area mode) on the rotary multi selector. • The AF area mode menu is displayed.
Selecting the Focus Area (A, B, C, D Modes) 4 Press the shutter-release button to take the picture. • If the camera focuses on the focus area when the shutter-release button is pressed halfway, the focus area display turns green and the focus is locked. 1/250 F5.6 • If the camera is unable to focus, the focus area display will blink. Press the shutter-release button halfway again to focus.
Shooting Options: Shooting Menu (A, B, C, D Modes) While shooting in A, B, C, D, E, F and N (A112), the shooting menu contains the following options. Picture Control A92 Change the settings for image recording according to the shooting scene or your preferences. Custom Picture Control A96 Save adjusted COOLPIX Picture Controls as custom settings to be used for picture editing. Metering A98 Choose how the camera meters exposure.
Shooting Options: Shooting Menu (A, B, C, D Modes) Displaying the Shooting Menu Choose A (Programmed auto), B (Shutter-priority auto), C (Aperture-priority auto), D (Manual), or E, F or N (User settings) by rotating the mode dial. Press the d button to display the shooting menu and use the rotary multi selector to change to A, B, C or D tab (A14). Shooting menu Picture Control Custom Picture Control Metering Continuous Autofocus mode Flash exp. comp.
Shooting Options: Shooting Menu (A, B, C, D Modes) Picture Control (COOLPIX Picture Control) Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Picture Control Change the settings for image recording according to the shooting scene or your preferences. Sharpness, contrast and saturation can be adjusted in detail. b Standard (default setting) Standard processing for balanced results. Recommended for most situations. c Neutral Minimal processing for natural results.
Shooting Options: Shooting Menu (A, B, C, D Modes) Customizing Existing COOLPIX Picture Controls: Quick Adjust and Manual Adjust COOLPIX Picture Control can be customized using Quick adjust, which allows for balanced adjustment of sharpness, contrast, saturation and other image editing components, or manual adjust, which allows for detailed adjusting of the components individually. 1 Use the rotary multi selector to choose COOLPIX Picture Control and press the k button.
Shooting Options: Shooting Menu (A, B, C, D Modes) Quick adjust 1 Adjust the sharpness, contrast and saturation levels automatically. Five levels of adjustment are available from -2 to +2. Choose from options between -2 and +2 to reduce or emphasize the effect of the selected COOLPIX Picture Control. The default setting is 0. Image sharpening More on Shooting Choose how much outlines are sharpened during shooting.
Shooting Options: Shooting Menu (A, B, C, D Modes) Toning3 Choose the tint used in monochrome photographs from B&W (black-and-white, the default setting), Sepia, and Cyanotype (blue-tinted monochrome). Pressing I on the rotary multi selector when Sepia or Cyanotype is selected enables you to choose from seven levels of saturation. Press J or K to adjust the saturation. 1 2 3 Quick adjust is not available in Neutral, Monochrome, Custom 1 and Custom 2.
Shooting Options: Shooting Menu (A, B, C, D Modes) Custom Picture Control (COOLPIX Custom Picture Control) Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Custom Picture Control Customized picture editing options can be created and saved as Custom Picture Controls. Creating COOLPIX Custom Picture Controls 1 More on Shooting 2 Use the rotary multi selector to choose Edit and save and press the k button.
Shooting Options: Shooting Menu (A, B, C, D Modes) 4 Choose the registration destination and press the k button. • The COOLPIX Custom Picture Control is registered. • Custom 1 or Custom 2 can be selected from the Picture Control and Custom Picture Control selection screen after registration. Save as Custom 1 Custom 2 Deleting COOLPIX Custom Picture Controls 1 3 Custom Picture Control Choose a COOLPIX Custom Picture Control to delete, and press the k button.
Shooting Options: Shooting Menu (A, B, C, D Modes) Metering Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Metering The process of measuring the brightness of the subject to determine the exposure is known as “metering.” Use this option to choose how the camera meters exposure. G Matrix (default setting) The camera meters a wide range on the screen. The camera sets the exposure for the entire frame. Recommended in most situations.
Shooting Options: Shooting Menu (A, B, C, D Modes) Continuous Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Continuous Change the settings for continuous shooting and BSS (Best Shot Selector). U Single (default setting) One image is shot each time the shutter-release button is pressed. V Continuous While the shutter-release button is fully held down, up to 45 pictures are shot at a rate of about 1.
Shooting Options: Shooting Menu (A, B, C, D Modes) B Notes on Continuous Shooting • Focus, exposure and white balance are fixed at the values for the first picture in each series. • The frame rate may become slower depending on the image quality, image size, memory card type or shooting conditions. • When ISO sensitivity (A74) is set to 3200 or Hi 1, the frame rate becomes slower. • This feature cannot be used simultaneously with certain features.
Shooting Options: Shooting Menu (A, B, C, D Modes) 2 Choose the interval between each shot and press the k button. • The maximum amount of frames that can be taken during interval timer shooting differs according to the interval taken between each shot. - 30 s: 600 images - 1 min: 300 images - 5 min: 60 images - 10 min: 30 images 3 Intvl timer shooting 30 s 1 min 5 min 10 min Press the d button.
Shooting Options: Shooting Menu (A, B, C, D Modes) Autofocus Mode Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Autofocus mode Choose how the camera focuses. A Single AF (default setting) The camera focuses only when the shutter-release button is pressed halfway. B Full-time AF The camera focuses continuously until the shutter-release button is pressed down halfway. Use with moving subjects. A sound will be heard while the camera focuses.
Shooting Options: Shooting Menu (A, B, C, D Modes) Noise Reduction Filter Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Noise reduction filter Set the strength of the noise reduction function that is normally performed when recording the picture. • For noise at slow shutter speeds, set with Long exposure NR (A103). M Normal (default setting) Perform noise reduction at the standard strength. l Low Perform noise reduction at a level lower than the standard strength.
Shooting Options: Shooting Menu (A, B, C, D Modes) Distortion Control Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Distortion control Choose whether to correct the peripheral distortion that occurs due to the intrinsic characteristics of lenses. Enabling distortion control reduces the size of the frame, as compared to when distortion control is not enabled. On Q Distortion is corrected. k Off (default setting) No distortion correction is performed.
Shooting Options: Shooting Menu (A, B, C, D Modes) B Notes on the Wide-angle Converter for Shooting • Set Wide-angle converter to On before shooting. Set Wide-angle converter to None when no converter lens is attached. • The built-in flash is changed to W (Off) when Wide-angle converter is set to On. Use flash units (A202) (available separately from Nikon) to shoot with the flash. • Using the flash units (available separately from Nikon) may darken the peripheral area of the picture.
Shooting Options: Shooting Menu (A, B, C, D Modes) Active D-Lighting Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Active D-Lighting “Active D-Lighting” preserves details in highlights and shadows, creating photographs with natural contrast. The image taken reproduces the contrast effect that is seen with the naked eye. This is particularly effective for shooting scenes with high contrast, such as brightly lit outdoor scenery from a dark room or shaded subjects at a sunny seaside.
Shooting Options: Shooting Menu (A, B, C, D Modes) Zoom Memory Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Zoom memory B More on Shooting When the zoom control is operated while pressing the w button, the camera changes in steps to the focal length (equivalent to 35mm [135] format of angle of view) of the zoom lens that is set in advance in Zoom memory. The following settings are available: 28 mm, 35 mm, 50 mm, 85 mm, 105 mm, 135 mm and 200 mm.
Shooting Options: Shooting Menu (A, B, C, D Modes) Functions that Cannot be Applied Simultaneously The flash mode, the focus mode, the self-timer/smile timer/remote control, the quick menu, the shooting menu and the specialized menu for E, F or N cannot be used with other functions. Restricted function Flash mode More on Shooting 108 Setting Description Focus mode (A40) When B (Infinity) is selected for shooting, the flash is not available.
Shooting Options: Shooting Menu (A, B, C, D Modes) Restricted function Setting Description ISO sensitivity Continuous (A99) When shooting in Multi-shot 16, ISO sensitivity is set automatically according to the brightness when shooting mode A, B or C is used. The setting for ISO sensitivity is fixed at 400 for shooting mode D. White balance Picture Control (A92) White balance is fixed to Auto when Monochrome is selected for shooting.
Shooting Options: Shooting Menu (A, B, C, D Modes) Restricted function Continuous/Auto bracketing Setting Description Picture Control (A92) White balance bracketing cannot be used when Monochrome is selected for shooting. Long exposure NR (A103) When On is selected for Long exposure NR, Multishot 16 is not available. Distortion control When Distortion control is set to On, Multi-shot 16 and Intvl timer shooting are not available.
Shooting Options: Shooting Menu (A, B, C, D Modes) Restricted function Digital zoom Slow shutter speed Setting Description The digital zoom cannot be used when Image quality is set to NRW (RAW), NRW (RAW) + Fine, NRW (RAW) + Normal or NRW (RAW) + Basic. Continuous (A99) The digital zoom cannot be used when Multi-shot 16 is selected for shooting.
E, F and N (User Setting Modes) Up to three setting combinations that are frequently used for shooting (user settings) can be saved in E, F and N. The saved settings can be immediately retrieved for shooting simply by rotating the mode dial to E, F or N. This is convenient when you want to shoot with these settings, or you only want to slightly change the settings. Shooting is possible in A (Programmed auto), B (Shutter-priority auto), C (Aperture-priority auto) and D (Manual).
E, F and N (User Setting Modes) Save the Settings in E, F or N The frequently used settings for shooting can be changed and saved in E, F and N. 1 Rotate the mode dial to E, F or N. 2 Change to a frequently used combination of shooting settings. 3 4 After changing the settings, choose Save user settings in the specialized menu for E, F or N, and press the k button. Choose Yes and press the k button. • The current settings are saved. • Rotate the zoom control to g (i) to show the settings.
E, F and N (User Setting Modes) Shooting in E, F or N (User Setting) Mode Rotate the mode dial to E, F or N to retrieve the settings saved in “Save the Settings in E, F or N” (A113). • Frame the subject and shoot with these settings, or change the settings as required. • The setting combinations that are retrieved when the mode dial is rotated to E, F or N can be changed as many times as you want in Save user settings.
More on Playback Operations in Full-Frame Playback In shooting mode, press the c (playback) button to enter playback mode and play back the images that have been shot (A30). The following operations can be performed in full-frame playback mode. 15/11/2010 15:30 0004.JPG 4 132 To Use Choose pictures f (h) Rotate the zoom control towards the f (h) in full-frame playback mode to return to the list by 119 date screen.
Viewing Multiple Pictures: Thumbnail Playback Rotate the zoom control to f (h) in full-frame playback mode (A30, 115) to display pictures as thumbnail images in thumbnail playback mode (except for list by date mode). 1/ 132 The following operations can be performed in thumbnail playback mode. To Use Description A Rotate the rotary multi selector, or press H, I, 12 J, or K. Choose pictures Rotate the command dial.
Viewing Multiple Pictures: Thumbnail Playback C Icons on the Thumbnails Protect icon Print-set icon When pictures with Print set (A123) and Protect (A129) settings are selected, the icons shown on the right appear. Movies are displayed as film frames. 1/ 132 Film frames Calendar Display 2010 11 7 14 21 28 1 8 15 22 29 2 9 16 23 30 3 10 17 24 4 11 18 25 5 12 19 26 6 13 20 27 3 The following operations can be performed in calendar display mode.
Taking a Closer Look: Playback Zoom Rotate the zoom control to g (i) in full-frame playback mode (A30) to zoom in on the current picture, enlarging and displaying the center of the picture. • The guide at lower right shows which portion is enlarged. The following operations can be performed while pictures are zoomed in. To Zoom in Zoom out Use g (i) f (h) More on Playback Crop picture Description A Rotate the zoom control to g (i). The zoom increases up to about 10×.
Viewing Pictures by Date (List by Date) In list by date mode, pictures taken on the same date can be played back. • In full-frame playback, zooming of images, editing, and movie playback can be performed in the same way as in the normal playback mode. Recording and playback of voice memos can also be performed.
Viewing Pictures by Date (List by Date) Operations in List by Date Mode The following operations are possible from the list by date screen (Step 2 of A119). To Use Description A More on Playback Select date Rotate the rotary multi selector, or press H or I. The date can also be selected by rotating the command dial. 12 Switch to full-frame playback k Display the picture shot on the selected date in full-frame playback mode.
Viewing Pictures by Date (List by Date) List by Date Menus In list by date mode, press the d button to enable the following operations for only the pictures shot on the specified date.
Playback Options: Playback Menu The following options are available in playback menu. k Quick retouch A135 Easily create retouched images in which contrast and saturation have been enhanced. I D-Lighting A136 Enhance brightness and contrast in dark portions of pictures. a Print set A123 Select pictures to print and the number of copies for each. b Slide show A126 View pictures stored in the internal memory or on a memory card in an automatic slide show. c Delete A127 Delete a picture.
Playback Options: Playback Menu Displaying the Playback Menu Press the d button to display the menu, use the rotary multi selector to change to the c tab and display the playback menu (A13). 15/11/2010 15:30 0004.JPG Playback menu Quick retouch D-Lighting Print set Slide show Delete Protect Rotate image 4 132 • Use the rotary multi selector to select items and set functions on menus (A12). • To exit the playback menu, press the d button.
Playback Options: Playback Menu 2 Choose the pictures (up to a maximum of 99) and number of copies (up to nine per picture). Print selection 1 1 3 • Rotate the rotary multi selector or press J or K to choose the pictures, and press H or I to set the number of copies for each. • Pictures can also be chosen by rotating the command dial. Back • Pictures selected for printing can be recognized by the check mark icon and the numeral indicating the number of copies to be printed.
Playback Options: Playback Menu B Notes on Print Set • When setting a print order in list by date mode and pictures other than those on the chosen date are already set for printing, the screen shown on the right is displayed. - Select Yes to add pictures taken on the selected shooting date, to the existing print order. - Select No to remove print marking from previously marked pictures and restrict the print order to pictures taken on the selected shooting date.
Playback Options: Playback Menu b Slide Show Press the d button M c (Playback menu) (A123) M b Slide show View pictures stored in the internal memory or on a memory card in an automatic slide show. 1 Use the rotary multi selector to choose Start and press the k button. Slide show Pause • To change the interval between pictures, choose Frame intvl, select the desired interval time, and press Start the k button before choosing Start.
Playback Options: Playback Menu c Delete: Deleting Multiple Pictures Press the d button M c (Playback menu) (A123) M c Delete Delete a picture. Multiple pictures can also be deleted. Erase selected images In the picture selection screen, choose the pictures for deletion. See “Selecting Pictures” (A128) for more information.
Playback Options: Playback Menu Selecting Pictures The picture selection screen, as shown on the right, is displayed in the following menus. Only one picture can be selected for some menu items, while for other menu items, multiple pictures can be selected.
Playback Options: Playback Menu 2 Press H or I to select ON or OFF (or the number of copies). Erase selected images • When ON is selected, a check mark is displayed in the current picture. To set multiple pictures, repeat steps 1 and 2. Back 3 Press the k button to apply the picture selection. • With selections such as Erase selected images, the confirmation dialog is displayed. Follow the instructions on the screen. d Protect Protect selected pictures from accidental deletion.
Playback Options: Playback Menu f Rotate Image Press the d button M c (Playback menu) (A123) M f Rotate image Change the orientation of pictures played back in the camera’s monitor after shooting. Still pictures can be rotated 90° clockwise or counterclockwise. Pictures that were recorded in the “tall” (portrait) orientation can be rotated up to 180° in either direction. Select a picture in the picture selection screen (A128) to display the rotate image screen.
Playback Options: Playback Menu h Copy: Copying Between the Internal Memory and Memory Card Press the d button M c (Playback menu) (A123) M h Copy Copy pictures between the internal memory and a memory card. 1 Use the rotary multi selector to select an option from the copy screen and press the k button. Copy • q: Copy pictures from the internal memory to the memory card. • r: Copy pictures from the memory card to the internal memory. Select a copy option and press the k button.
Voice Memos: Recording and Playback Use the built-in or external microphone to record voice memos for pictures marked with n in full-frame playback mode (A30). 15/11/2010 15:30 0004.JPG Recording Voice Memos 4 132 A voice memo, up to 20 seconds in length, is recorded while the k button is pressed down. • Do not touch the microphone during recording. • During recording, o and p blink on the monitor.
Editing Pictures Picture Editing Functions Images can be easily edited with this camera using the functions below. Edited images are stored as separate files (A203). Editing function Application Quick retouch (A135) Easily create a copy with enhanced contrast and richer colors. D-Lighting (A136) Create a copy of the current picture with enhanced brightness and contrast, brightening dark portions of the picture.
Picture Editing Functions C Restrictions on Picture Editing The following limitations apply when editing pictures that were created by editing. Copies Created By: Editing Pictures 134 Can Be Edited By: Quick retouch D-Lighting Skin softening, Small picture, or crop can be used. Quick retouch and D-Lighting cannot be used together. Small picture Straighten Miniature effect Crop No additional editing functions can be used.
Editing Pictures k Quick Retouch: Enhancing Contrast and Saturation Easily create retouched images in which contrast and saturation have been enhanced. Retouched copies are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14). 2 Use the rotary multi selector to choose k Quick retouch and press the k button.
Editing Pictures I D-Lighting: Enhancing Brightness and Contrast Create copies with enhanced brightness and contrast, brightening dark portions of a picture. Enhanced copies are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14). 2 Use the rotary multi selector to choose I DLighting and press the k button.
Editing Pictures g Small Picture: Resizing Pictures Create a small copy of the picture taken. Suitable for displaying on web pages or sending as e-mail attachments. The available size is l 640×480, m 320×240 or n 160×120. Small copies are stored as separate files with a compression ratio of 1:16. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14).
Editing Pictures j Black Border: Adding a Black Border to Pictures This function creates black borders along the border of a picture. Choose from Thin, Medium, or Broad lines. The created pictures are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14).
Editing Pictures e Skin Softening: Making Skin Appear Smoother Skin softening can be applied to faces that are detected in pictures already taken, to make skin appear smoother. Pictures edited with this function are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14). 2 Use the rotary multi selector to choose e Skin softening and press the k button.
Editing Pictures 4 Confirm the results. • Up to 12 faces, in order of proximity to the center of the frame, can be enhanced. • When multiple faces are edited using skin softening, use the rotary multi selector J and K to switch the face that is displayed. Back • To adjust the extent of skin softening, press the d button and return to step 3. • To create a copy edited with skin softening, press the k button. • Copies created by editing with skin softening can be 15/11/2010 0004.
Editing Pictures R Straighten: Compensating for Picture Slanting Compensate for the slanting of shot pictures. Pictures edited with this function are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button. • Switch to the c tab when the playback menu is not displayed (A14). 2 Use the rotary multi selector to choose R Straighten and press the k button. • The straighten screen is displayed. Compensate for slanting.
Editing Pictures S Miniature Effect: Setting Close-up Miniature Effects Create a copy that appears to be a photo of a diorama. Pictures taken while looking down from a high location and with the main subject near the center of the screen are suitable for the miniature effect. Pictures edited with this function are stored as separate files. 1 Choose the desired picture from full-frame (A30) or thumbnail (A116) playback mode and press the d button.
Editing Pictures F NRW (RAW) Processing: Creating JPEG Images from NRW Images Create JPEG-format copies by performing RAW processing within the camera for NRW (RAW) images saved with an Image quality (A68) setting of NRW (RAW), NRW (RAW) + Fine, NRW (RAW) + Normal or NRW (RAW) + Basic. 1 Press the d button in playback mode. • Switch to the c tab when the playback menu is not displayed (A14).
Editing Pictures 4 Set the NRW (RAW) processing parameters. NRW (RAW) processing White balance • Apply the settings below while checking the image and rotating the zoom control to g (i). Rotate to g (i) again to return to the setting screen. - White balance: Choose a white balance setting EXE (A76). Reset Check - Exp. +/-: Adjust the brightness. - Picture Control: Choose an image processing setting (A92). - Image quality: Choose the image quality from Fine, Normal, or Basic (A68).
Editing Pictures a Crop: Cropping Pictures Create a copy containing only the portion visible on the monitor when u is displayed with playback zoom (A118) enabled. Cropped copies are stored as separate files. 1 Rotate the zoom control to g (i) in full-frame playback mode (A30) to zoom in on the picture. • To crop a picture displayed in “tall” (portrait) orientation, zoom in on the picture until the black bars displayed on the both sides of the monitor disappear.
Movie Recording and Playback Recording Movies High-definition movies can be shot with sound. • Regardless of the remaining memory on the memory card, the maximum length for a single movie is 29 minutes. 1 Rotate the mode dial to D. • The monitor shows the amount of available recording time. 2 Press the shutter-release button all the way down to start recording. • The camera focuses in the center focus area. The focus area is not displayed when the movie is recorded.
Recording Movies B Notes on Movie Recording • When recording a movie onto a memory card, a memory card with an SD speed class of Class 6 or higher is recommended (A221). If the transfer speed of the card is slow, the movie recording may end unexpectedly. • Using a digital zoom causes image quality to deteriorate. If you start recording the movie without using digital zoom, and you rotate the zoom control in the g direction, the zoom stops at the maximum optical zoom ratio.
Recording Movies Selecting a Movie Type to Shoot You can choose the type of movie to shoot. The higher the resolution and bitrate, the higher the picture quality; but the file size also becomes larger. Option Description x HD 720p (1280×720) (default setting) Movies with an aspect ratio of 16:9 are recorded in highdefinition. This option is suited to playback on a wide screen TV. • Image size: 1280×720 pixels • Movie bitrate: 9 Mbps y VGA (640×480) Movies with an aspect ratio of 4:3 are recorded.
Recording Movies C Maximum Movie Length Option Internal memory (79 MB) Memory card (4 GB)* x HD 720p (1280×720) (default setting) 1 min 10 s 55 min y VGA (640×480) 3 min 22 s 2 h 30 min 13 min 57 s 11 h z QVGA (320×240) All figures are approximate. The maximum movie length varies with the make of the memory card and the bitrate of the shot movie. * The maximum recording time for a single movie is 29 minutes.
Recording Movies Autofocus Mode Set to D (Movie) M d M D (Movie menu) (A149) M Autofocus mode Choose how the camera focuses when recording movies. Option Description Locks on the focus when the shutter-release button is pressed halfway. A Single AF Select this option when the distance between the camera and the (default setting) subject remains fairly consistent. B Full-time AF The camera focuses continuously during movie recording.
Movie Playback In full-frame playback mode (A30), movies can be recognized by a movie options icon (A148). To play a movie, press the k button. 15/11/2010 15:30 0010.MOV 10m16s Use the zoom control g or f during playback to adjust the volume. Playback controls appear at the top of the monitor. Press the rotary multi selector J or K to choose a playback control, then press the k button to perform the selected operation. The following operations are available.
Movie Playback Editing Movies You can extract only the required parts of a movie and save as a separate file. 1 2 Play back and pause the movie that you want to edit (A151). Use the rotary multi selector J or K to choose I on the playback control and press the k button. • The movie editing screen is displayed. 7m42s 3 Press H or I to choose J (Choose start point) on the editing playback control.
Movie Playback B Notes on Editing Movies • Once a movie is created through editing, it cannot be used again for extracting a movie. To extract another range, select and edit the original movie. • Because the edited movies are extracted in 1-second units, they may vary slightly from the set start point and end point. Sections shorter than two seconds cannot be extracted. • Editing functions are not available when there is not enough free space in the internal memory or on the memory card.
Connecting to Televisions, Computers and Printers Connecting to a TV Connect the camera to a television to play back pictures on the television. If your television is equipped with an HDMI connector, you can connect it to the camera with a commercially available HDMI cable to enjoy recorded movies in the high-definition quality. Connecting to Televisions, Computers and Printers 1 Turn off the camera. 2 Connect the camera to the TV.
Connecting to a TV 3 Tune the television to the video channel. • See the documentation provided with your television for details. 4 Hold down the c button to turn on the camera. B Connecting to Televisions, Computers and Printers • The camera enters playback mode, and the recorded pictures are displayed on the television. • While the camera is connected to the TV, the monitor remains off. Notes on Connecting an HDMI Cable • An HDMI cable is not supplied.
Connecting to a Computer Use the supplied USB cable to connect the camera to a computer and copy (transfer) images to the computer. Before Connecting the Camera Connecting to Televisions, Computers and Printers Install the Software Use the supplied ViewNX 2 CD and install the following software on the computer. • ViewNX 2: Use the image transfer feature “Nikon Transfer 2” to save images that were captured with the camera on the computer. Saved images can be viewed and printed.
Connecting to a Computer Transferring Images from a Camera to a Computer Start the computer to which ViewNX 2 was installed. Be sure that the camera is off. Connect the camera to the computer using the supplied USB cable. Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable. 4 Turn on the camera. Connecting to Televisions, Computers and Printers 1 2 3 • The power-on lamp lights.
Connecting to a Computer 5 Connecting to Televisions, Computers and Printers 158 Start the ViewNX 2 image transfer feature “Nikon Transfer 2” installed on the computer. • Windows 7 When the Devices and Printers K P7000 screen is displayed, click Change program under Import pictures and videos. Select Import File using Nikon Transfer 2 in the Change program dialog and click OK. Double-click Import File on the Devices and Printers K P7000 screen.
Connecting to a Computer 6 Confirm that the source device is displayed in the transfer options Source panel and click Start Transfer. Start Transfer button Any images that have not been transferred to the computer will be transferred (default setting of ViewNX 2). ViewNX 2 starts automatically when the transfer is complete (default setting of ViewNX 2). Transferred images can be viewed.
Connecting to a Computer C Transferring Images Using a Computer’s Card Slot or a Commerciallyavailable Card Reader Connecting to Televisions, Computers and Printers When the memory card is inserted into a computer’s card slot or into a commercially-available card reader, the images can be transferred using “Nikon Transfer 2”, the image transfer feature of ViewNX 2. • Make sure that the memory card being used is supported by the card reader or other card reading device.
Connecting to a Printer Users of PictBridge-compatible (A220) printers can connect the camera directly to the printer and print pictures without using a computer. The steps for printing are as follows.
Connecting to a Printer Connecting the Camera and Printer Connecting to Televisions, Computers and Printers 1 Turn off the camera. 2 Turn on the printer. • Check the printer settings. 3 Connect the camera to the printer using the supplied USB cable. • Be sure that the connector is oriented correctly. When disconnecting the cable, do not pull the connector at an angle. 4 Turn on the camera. • When connected correctly, the PictBridge startup screen (1) is displayed in the camera monitor.
Connecting to a Printer Printing Pictures One at a Time After connecting the camera to the printer correctly (A162), print pictures by following the procedure below. 1 Print selection 15/11 2010 • Pictures can also be chosen by rotating the command dial. • Rotate the zoom control to f (h) to display 12 thumbnails, or to g (i) to switch back to full-frame playback. 2 Choose Copies and press the k button. NO.
Connecting to a Printer 6 Choose Start print and press the k button. PictBridge Start print Copies Paper size Connecting to Televisions, Computers and Printers 7 Printing starts. • The monitor display returns to that shown in step 1 when printing is complete. • To cancel before all copies have been printed, press the k button.
Connecting to a Printer 4 Choose Print selection, Print all images or DPOF printing and press the k button. Print menu Print selection Print all images DPOF printing Paper size Choose the pictures (up to a maximum of 99) and 10 Print selection number of copies (up to nine per picture). • Press the rotary multi selector J or K to 1 1 3 choose the pictures, and press H or I to set the number of copies for each. • Pictures can also be chosen by rotating the command dial.
Connecting to a Printer DPOF printing Connecting to Televisions, Computers and Printers Pictures for which a print order was created in Print set option (A123) can be printed. • When the menu shown on the right is displayed, choose Start print and press the k button to start printing. • Choose Cancel and press the k button to return to the print menu. • To view the current print order, choose View images and press the k button. To print pictures, press the k button again.
Basic Camera Setup Setup Menu The setup menu contains the following options. Basic Camera Setup Welcome screen A169 Choose whether or not to display the welcome screen on the monitor when the camera is turned on. Date A170 Set camera clock and choose home and destination time zones. Monitor settings A173 Set the picture display after shooting, the screen brightness, and the display options when the monitor is turned on. Date imprint A174 Imprint date and time of recording on pictures.
Setup Menu Basic Camera Setup AE/AF lock button A185 Choose the function to be performed when the AE-L/AF-L button is pressed. Fn button A186 Choose the function to be performed when the shutter-release button is pressed while pressing the w button. Av/Tv button A187 Choose the function to be performed when the Av/Tv button is pressed. Customize My Menu A187 Register frequently used menu items in My Menu. Reset file numbering A188 Reset the file numbering.
Setup Menu 3 Press H or I to select the z tab. Set up Welcome screen Date Monitor settings Date imprint Vibration reduction Motion detection AF assist 4 Press K or the k button. • The setup menu items can now be selected. • Use the rotary multi selector to select items and set functions on menus (A12). • To exit the setup menu, press the d button or press J and switch to another tab.
Setup Menu Date Press the d button M z (Setup menu) (A168) M Date Set the camera’s internal clock. Date Set the camera clock to the current date and time. Use the rotary multi selector to set the date and time. • Choose an item: Press K or J (selected in the following order: D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝ DMY (date display order)). • Set the contents: Rotate the rotary multi selector, or press H or I.
Setup Menu 3 Press K. • The time zone selection screen is displayed. Time zone 15/11/2010 15:30 London, Casablanca Home time zone Travel destination 4 Press J or K to choose the travel destination (Time zone). B Time difference 10:30 -5:00 EST: New York Toronto Lima Back Time zone 15/11/2010 10:30 EST:New York Toronto, Lima Home time zone Travel destination Basic Camera Setup • The time difference between home and the travel destination is displayed.
Setup Menu D Time Zones The camera supports the time zones listed below. For time differences not listed below, set the camera clock using Date. UTC +/- UTC +/- Location Midway, Samoa +1 -10 Hawaii, Tahiti +2 Madrid, Paris, Berlin Athens, Helsinki, Ankara -9 Alaska, Anchorage +3 Moscow, Nairobi, Riyadh, Kuwait, Manama -8 PST (PDT): Los Angeles, Seattle, Vancouver +4 Abu Dhabi, Dubai -7 MST (MDT): Denver, Phoenix +5 Islamabad, Karachi -6 CST (CDT): Chicago, Houston, Mexico City +5.
Setup Menu Monitor Settings Press the d button M z (Setup menu) (A168) M Monitor settings Change the settings for the options below. X Virtual horizon 1/250 F5.6 1342 Display the virtual horizon for checking whether the camera is horizontal. When the camera is horizontal or vertical, the horizontal line on the virtual horizon display turns green. B Y View/hide histograms 1/250 F5.6 1342 Display a graph that shows the brightness distribution in the picture.
Setup Menu Date Imprint Press the d button M z (Setup menu) (A168) M Date imprint The shooting date and time can be imprinted on pictures at the time of shooting. This information can be printed even from printers that do not support printing of the date and time (A125). 15/11/2010 Date The date is imprinted on pictures. Date and time The date and time are imprinted on pictures. Off (default setting) Basic Camera Setup The date and time are not imprinted on pictures.
Setup Menu Vibration Reduction Press the d button M z (Setup menu) (A168) M Vibration reduction Set the vibration reduction for taking still pictures and movies. Use to correct blur, which is caused by the slight hand movements known as camera shake that commonly occur when shooting at the telephoto zoom position or at slow shutter speeds. When the camera is stabilized for still picture shooting with a tripod, set vibration reduction to Off. On (default setting) Compensates for camera shake.
Setup Menu Motion Detection Press the d button M z (Setup menu) (A168) M Motion detection Enable motion detection to reduce the effects of camera shake and subject movement when shooting still pictures. Auto When the camera detects the movement of the subject or camera shake, the ISO sensitivity is raised and the shutter speed is increased to reduce their effects. However, motion detection does not function in the following situations.
Setup Menu AF Assist Press the d button M z (Setup menu) (A168) M AF assist Enable or disable the AF-assist illumination that assists the autofocus when the lighting is poor. Auto (default setting) AF-assist illumination turns on automatically when the subject is poorly lit. The illuminator has a range of about 6.5 m (21 ft.) at the maximum wide-angle position and about 5.5 m (18 ft.) at the maximum telephoto position.
Setup Menu Digital Zoom Press the d button M z (Setup menu) (A168) M Digital zoom Enable or disable the digital zoom. On (default setting) When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at g (i) triggers the digital zoom (A27). Crop Limit zoom magnification up to the position of V (except when recording a movie). Also limit the digital zoom to the range at which image quality of the shot still picture does not deteriorate.
Setup Menu Zoom Speed Press the d button M z (Setup menu) (A168) M Zoom speed Set the zoom operation speed. Slow down the zoom speed to minimize the recording of the zoom operating noise during movie recording. Auto (default setting) During still picture shooting, operate the zoom at the Normal speed. During movie recording, operate the zoom at a lower speed than Normal to minimize the recording of the zoom operating noise.
Setup Menu Record Orientation Press the d button M z (Setup menu) (A168) M Record orientation Set whether or not to record the orientation data with the picture when shooting. Auto (default setting) Record the orientation data with the picture when shooting. When the picture is played back, the recorded orientation data is used to automatically rotate the picture for display. The following three data orientation types for the camera can be recorded.
Setup Menu Auto Off Press the d button M z (Setup menu) (A168) M Auto off If no operations are performed for a certain period while the camera is on, the monitor is turned off to save power and the camera enters standby mode (A19). In this menu, set the time before the camera enters standby mode. Choose from 30 s, 1 min (default setting), 5 min and 30 min. Basic Camera Setup C When the Monitor Is Turned Off to Save Power • The power-on lamp blinks in standby mode.
Setup Menu Format Memory/Format Card Press the d button M z (Setup menu) (A168) M Format memory/Format card Format the internal memory or a memory card. Formatting Internal Memory To format the internal memory, remove the memory card from the camera. The Format memory option appears in the setup menu. Format memory All images will be deleted! OK? Format No Formatting Memory Card When the memory card is inserted in the camera, the Format card option appears in the setup menu.
Setup Menu Language Press the d button M z (Setup menu) (A168) M Language Choose one of 24 languages for displaying the camera menus and messages. Czech Danish German (default setting) Italian Hungarian Dutch Spanish Polish Greek French Indonesian Portuguese Russian Finnish Norwegian Swedish Turkish Arabic Simplified Chinese Traditional Chinese Japanese Korean Thai Press the d button M z (Setup menu) (A168) M TV settings Adjust the settings for connecting to a TV.
Setup Menu Built-in ND Filter Press the d button M z (Setup menu) (A168) M Built-in ND filter When the camera’s built-in ND filter is used, the amount of light that enters the camera while shooting can be reduced in three steps. Use in situations such as when overexposure results from the subject being too bright. Set whether or not to use the built-in ND filter to reduce the light in the following shooting modes.
Setup Menu AE/AF Lock Button Press the d button M z (Setup menu) (A168) M AE/AF lock button Choose the function to be performed when the AE-L/AF-L button (A11) is pressed during still picture shooting. AE/AF lock (default setting) Lock both the focus and exposure when the AE-L/AF-L button is pressed while shooting. AE lock only Lock only the exposure when the AE-L/AF-L button is pressed while shooting. AF lock only Lock only the focus when the AE-L/AF-L button is pressed while shooting.
Setup Menu Fn Button Press the d button M z (Setup menu) (A168) M Fn button Choose the function to be performed when the shutter-release button is pressed while pressing the w button (A11). • This can be used when A, B, C, D, E, F or N is chosen for shooting mode. Off (default setting) Shoot without changing the setting. NRW (RAW)/NORMAL (Image quality) (A68) When Fine, Normal or Basic is set, shoot with the NRW (RAW) setting. When NRW (RAW) is set, shoot with the Normal setting.
Setup Menu Av/Tv Button Press the d button M z (Setup menu) (A168) M Av/Tv button Choose the function to be performed when the Av/Tv button (A9) is pressed. Toggle Av/Tv selection (default setting) Switch the shutter speed or aperture value setting operation. Each time the Av/Tv button is pressed, the operation switches between the command dial and the rotary multi selector (A63, 64, 65). • Available only when A, B, C, D, E, F or N is selected for shooting mode.
Setup Menu Registering into My Menu 1 Use the rotary multi selector to choose the menu item and press the k button. • The menu item selection screen is displayed. 2 Choose the menu item to be registered and press the k button. • The chosen menu item is switched. • To finish the setting, press the rotary multi selector J.
Setup Menu Blink Warning Press the d button M z (Setup menu) (A168) M Blink warning Choose whether or not blinking eyes are detected when using face priority (A86) in the following shooting modes. • Scene auto selector (A46), Portrait (A48) or Night portrait (A49) scene modes • Shooting modes A, B, C, D, E, F, N, and O (low noise night) (when Face priority (A84) is selected for AF area mode) On Off (default setting) Blink warning does not take effect.
Setup Menu Operating the Did someone blink? Screen The following operations can be performed when the Did someone blink? screen is displayed. If no operations are performed for a few seconds, the screen automatically returns to the shooting mode screen. Did someone blink? Exit To g (i) Return to full-frame playback f (h) Rotate the zoom control to f (h). Basic Camera Setup l Press the l button. k Return to shooting mode 190 Rotate the zoom control to g (i).
Setup Menu Reset All Press the d button M z (Setup menu) (A168) M Reset all When Reset is selected, the camera settings are restored to the default values.
Setup Menu Quick Menu Option Default value Image quality (A68) Normal Image size (A70) M 3648×2736 Movie options (A148) HD 720p (1280×720) ISO sensitivity (A74) Auto Minimum shutter speed (A74) None White balance (A76) Auto Auto bracketing (A80) Off Shooting Menu Option Basic Camera Setup 192 Default value Picture Control (A92) Standard Metering (A98) Matrix Continuous (A99) Single Intvl timer shooting (A100) 30 s Autofocus mode (A102) Single AF Flash exp. comp. (A102) 0.
Setup Menu Setup Menu Option Default value None Image review (A173) On Brightness (A173) 3 Monitor settings (A173) Hide all items Date imprint (A174) Off Vibration reduction (A175) On Motion detection (A176) Off AF assist (A177) Auto Red-eye reduction (A177) Pre-flash on Digital zoom (A178) On Zoom speed (A179) Auto Button sound (A179) On Shutter sound (A179) On Record orientation (A180) Auto Auto off (A181) 1 min HDMI (A183) Auto HDMI device control (A183) On Built-in ND
Setup Menu Others Option Default value Paper size (A163, 164) Default Frame intvl for Slide show (A126) 3s Basic Camera Setup • Choosing Reset all also clears the current file number (A203) in the memory. After resetting, numbering continues from the lowest number available in the internal memory or the memory card. If Reset all is performed after all pictures are deleted from the internal memory or memory card (A127), the file numbers for the next shot pictures start from 0001.
Caring for the Camera Caring for the Camera To ensure continued enjoyment of this Nikon product, observe the following precautions when using or storing the device. B Keep dry The device will be damaged if immersed in water or subjected to high humidity. B Do not drop The product may malfunction if subjected to strong shock or vibration. B Handle the lens and all moving parts with care Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber.
Caring for the Camera C The Battery • Check the battery level when taking the camera out, and charge the battery if necessary. Do not continue charging once the battery is fully charged, as this will result in reduced battery performance. If possible, carry a fully-charged spare battery when taking pictures on important occasions. • Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
Caring for the Camera Cleaning Lens/ viewfinder Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges.
Caring for the Camera Storage Turn the camera off when not in use. Check that the power-on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period.
Technical Notes and Index Optional Accessories Rechargeable battery Rechargeable Li-ion Battery EN-EL14 Battery charger Battery Charger MH-24* AC Adapter EH-5a (connect as shown) and Power Connector EP-5A (connect as shown) When the Power Connector is inserted into the camera and the AC Adapter is connected, the camera can be powered from an electrical outlet. The AC Adapter and the Power Connector are available separately.
Optional Accessories Remote Control ML-L3 How to replace the battery (3 V CR2025 lithium battery) in the remote control. Remote control • When changing the remote control battery, be sure that the battery’s positive (+) and negative (-) terminals are oriented correctly. • Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery” (A196). * When using in other countries, use a commercially available plug adapter as necessary.
Optional Accessories B Converter and Adapter Ring • Be sure to set Wide-angle converter (A104) to On. • Do not attach lens hoods or filters to the converter lens or adapter ring, as they may cause shading around the edges of pictures. B External Flash The accessory shoe for the COOLPIX P7000 is compatible with Nikon Speedlights SB-400, SB-600 and SB-900, and the Wireless Speedlight Commander SU-800. Attempting to attach other external flashes may damage the camera and the external flash.
Optional Accessories Using Speedlights (External Flash Unit) The camera is equipped with an accessory shoe, allowing Speedlights SB-400, SB600 or SB-900 (available separately) to be mounted on the camera. Use Speedlights for indirect lighting or when additional lighting is required. The built-in flash is changed to W (Off) automatically when using Speedlights.
File and Folder Names Pictures, movies and voice memos are assigned file names as follows. DSCN0001.
File and Folder Names • In Panorama assist (A55), a folder is created for each shooting session using the following naming convention: “Folder number + P_XXX” (e.g., “101P_001”). Pictures are saved in sequence in file numbers starting from 0001. • Each time a picture is taken in Interval timer shooting (A99), a folder named with the convention: 'Folder number + INTVL' (e.g., 101INTVL) is created. Pictures are saved in sequence in file numbers starting from 0001.
Error Messages The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them. Display Description Solution A O (blinks) Clock not set. B Battery is running low. Prepare to charge or change battery. 16, 18 N Battery exhausted. Battery exhausted. Set clock. Charge or change battery. 170 16, 18 Turn off camera, and allow battery to cool down before resuming use.
Error Messages Display N Out of memory. Description Solution • Choose lower image quality or smaller image size. • Delete pictures and movies. Memory card is full. • Replace memory card. • Remove memory card and use internal memory. Error occurred while recording picture. Format the internal memory or memory card. Camera has run out of Replace the memory card, or format file numbers. the internal memory/memory card. P Image cannot be saved. Technical Notes and Index N Image cannot be modified.
Error Messages Display N Memory contains no images. N File contains no image data. N All images are hidden. N This image cannot be deleted. Solution A No pictures in the internal memory or memory card. • Pictures stored in the internal 22 memory can only be viewed if no memory card is inserted. • To copy files from internal memory 131 to memory card, press the d button to display the copy screen, then copy the files from internal memory to memory card. File not created with COOLPIX P7000.
Error Messages Display Description The built-in flash is lowered when the N scene mode is Night Press the flash pop-up portrait or button to raise the flash. Backlighting, or the Continuous mode is Continuous flash. Technical Notes and Index 208 Solution Press the K (flash pop-up) button to raise the built-in flash. A 33, 49, 55, 99 Press the K (flash pop-up) button to raise the built-in flash. The camera 33, 46 can still shoot normally with the flash lowered if you do not wish to use it.
Error Messages Display PR Printer error: check printer status. Description Printer error Solution Check printer. After solving the problem, select Resume and press the k button to resume printing.* A - Load the specified paper size, select Specified paper size is PR Resume and press the k button to Printer error: check paper not loaded. resume printing.* - Paper has jammed in the printer. Remove the jammed paper, select Resume and press the k button to resume printing.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Refer to the page numbers in the right-most column for more information. Display, Settings and Power Supply Problem Cause/Solution Technical Notes and Index 19 24 19, 30 Monitor is blank. 26 Monitor is hard to read. • Ambient lighting too bright: use viewfinder or move to darker location. • Adjust monitor brightness.
Troubleshooting Problem Cause/Solution A Date not appearing on pictures even when Date imprint is enabled. • A shooting mode that does not support date imprint is selected. • Another function that is set now is restricting the date imprinting. • The date cannot be imprinted onto a movie. Camera settings reset. Clock battery is exhausted; all settings were restored to their 171 default values. Reset file numbering cannot be done.
Troubleshooting Shooting Problem Cause/Solution Disconnect the audio/video cable, HDMI cable or USB cable. 154, 157, 162 30 No picture taken when shutterrelease button is pressed. • When camera is in playback mode, press the c or shutter-release button. • When menus are displayed, press the d button. • Battery is exhausted. • When the scene mode is Night portrait or Backlighting, or Continuous in the shooting menu is set to Continuous flash, raise the built-in flash.
Troubleshooting Problem Zoom does not operate. Cause/Solution • Off is selected for Digital zoom in the setup menu. • The digital zoom cannot be used in the following situations. - When the focus mode is set to E (manual focus) - When Subject tracking is selected for AF area mode - When Smile timer is set - When Scene auto selector, Portrait or Night Digital zoom is not portrait is selected in scene mode available.
Troubleshooting Technical Notes and Index Problem Cause/Solution Randomly spaced bright pixels (“noise”) appear in image. As the subject is dark, shutter speed is too slow or ISO sensitivity is too high. • Use flash. • Specify a lower ISO sensitivity setting. • Apply Long exposure NR in the shooting menu to suit situations. • Use a scene mode which has noise reduction. Pictures are too dark (underexposed). Flash is set to W (Off). Built-in flash window is blocked. Subject is beyond flash range.
Troubleshooting Problem Cannot set COOLPIX Picture Control. Cause/Solution Another function that is set now is restricting COOLPIX Picture Control. A 108 Playback Problem File cannot be played back. A Cause/Solution • File was overwritten or renamed by computer or another make or model of camera. • Interval timer shooting in progress. • NRW (RAW) images or movies recorded with cameras other than COOLPIX P7000 cannot be played back.
Troubleshooting Problem Nikon Transfer 2 does not start when camera is connected to a computer. Technical Notes and Index 216 A Cause/Solution • • • • • Camera is off. Battery is exhausted. USB cable is not correctly connected. Camera is not recognized by the computer. Confirm that the operating system used is compatible with the camera. • Computer is not set to launch Nikon Transfer 2 automatically. For more information on Nikon Transfer 2, refer to help information contained in ViewNX 2.
Specifications Nikon COOLPIX P7000 Digital Camera Type Effective pixels Image sensor Lens Focal length f/-number Construction Digital zoom Vibration reduction Autofocus (AF) Focus range (from lens) Focus-area selection Viewfinder Frame coverage Frame coverage (shooting mode) Frame coverage (playback mode) Storage Media File system File formats Image size (pixels) Internal memory (approx. 79 MB), SD/SDHC/SDXC memory card DCF, Exif 2.
Specifications ISO sensitivity (Standard output sensitivity) • • • • • ISO 100, 200, 400, 800, 1600, 3200, Hi 1 (equivalent to 6400) Auto (auto gain from ISO 100 to 800) High ISO Sensitivity auto (ISO 100 to 1600) Fixed range auto (ISO 100 to 200, 100 to 400) Low noise night mode (ISO 400 to 12800) Exposure Metering Exposure control Shutter Speed • • • • 1/2000 - 8 s (A, B mode) 1/4000 - 8 s (C mode) 1/4000 - 60 s (D mode) 4 s (Fireworks show scene mode) Technical Notes and Index Aperture Range Se
Specifications Supported languages Power sources Battery life (EN-EL14) Tripod socket Dimensions (W × H × D) Weight Operating environment Temperature Humidity Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, Thai, Turkish • One Rechargeable Li-ion Battery EN-EL14 (supplied) • AC Adapter EH-5a (used in combination with the Power Connector E
Specifications Battery Charger MH-24 Rated input AC 100 to 240 V, 50/60 Hz, 0.2 A max. Rated capacity 18 to 24 VA Rated output DC 8.4 V, 0.9 A Supported rechargeable battery Rechargeable Li-ion Battery EN-EL14 Charging time Approx. 1 hour and 30 minutes when no charge remains Operating temperature 0 to 40 °C (32 to 104 °F) Dimensions (W × H × D) Approx. 70 × 26 × 97 mm (2.8 × 1.0 × 3.8 in.) Weight Approx. 89 g (3.
Specifications Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. • When recording a movie onto a memory card, a memory card with an SD speed class of Class 6 or higher is recommended. If the transfer speed of the card is slow, the movie recording may end unexpectedly.
Index Symbols Technical Notes and Index R 57 g AE-L/AF-L button 11, 185 G AF area mode 12, 84 C Aperture-priority auto mode 60, 64 k (apply selection) button 12 d Auto bracketing 67, 80 A Auto mode 24 f Av/Tv button 9, 187 l Delete button 31, 132, 153 X Flash mode 33 K Flash pop-up button 33 p Focus mode 41 w FUNC button 11, 107, 186 a Image quality/Image size/Movie options 67, 68, 148 b ISO sensitivity 67, 74 O Low noise night mode 58 D Manual mode 60, 65 d Menu button 13 x Monitor button 14 D Movie mode
Index Contrast 94 Converter lens 199 COOLPIX Custom Picture Control 96 COOLPIX Picture Control 92 Copy n 54 Crop 145, 152 Custom Picture Control 96 Customize my menu 187 D Date 20, 170 Date imprint 174 Daylight saving time 20, 171 Delete 31, 127, 132, 153 Digital zoom 27, 178 Diopter adjustment control 26 Distortion control 104 D-Lighting 136 DPOF printing 166 DSCN 203 Dusk/dawn i 51 Focus lock 29 Focus mode 40 Folder name 203 Food u 53 Format 23, 182 Format the internal memory 182 Format the memory card
Index Manual focus 40, 42 Manual mode 65 Memory capacity 24 Memory card 22, 221 Memory card slot 22 Metering 98 Microphone 132, 146 Miniature effect 142 Minimum shutter speed 74 Mode dial 44 Monitor 6, 8, 197 Monitor brightness 173 Monitor brightness boost indicator 15 Monitor settings 173 Motion detection 176 Movie length 149 Movie menu 149 Movie mode 146 Movie options 148 Movie playback 151 Movie recording 146 Multi-shot 16 99 Museum l 54 My menu 67 Technical Notes and Index N Night landscape j 51 Night
Index Shooting 24, 44 Shooting date information 14, 82 Shooting menu 90 Shooting with Face Priority 86 Shutter sound 179 Shutter speed 61 Shutter-priority auto mode 63 Shutter-release button 28 Single 99 Skin softening 36, 37, 139 Slide show 126 Slow sync 32 Small picture 137 Smile timer 36 Snow z 50 Sound settings 179 Speedlight 111, 199, 202 Sports d 49 SSCN 203 Straighten 141 Subject tracking 85, 88 Sunset h 51 Switching between tabs 14 Tele 27 Television 154 Thumbnail display 116 Time difference 172 Tim
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
