○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ M7100 Telephone User Card ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Your Norstar M7100 telephone Release button cancels active calls. Display shows the time, date, call information and guides you while using Norstar* features. Memory button is programmable to store a feature or to automatically dial internal or external number. Dial pad Feature button starts or ends a feature. Volume control Hold button Button inquiry Confirm that your memory button has the correct snap-on cap by checking its programming. 1. Release all calls and open lines with dial tone. 2. Press . 3.
Making calls Internal calls 1. Pick up the receiver. 2. Dial the internal number. External calls 1. Pick up the receiver. 2. Dial (or your system's external line access code). 3. Dial the external telephone number. · Note: Internal numbers and the external access code are supplied by your System Coordinator. Making and answering a second call ˙ ˙ The M7100 telephone allows you to have two calls active at the same time. By using you can switch between calls.
Programming the memory button About the memory button The memory button can store a telephone number or feature code to give you one touch dialing or feature activation. You can change the memory button by programming it with a new number or feature code. Memory button Remember: Press Programming memory buttons ƒ•‚ to check the memory button. External autodial 1. If you are on a call or an open line with dial tone, press or . 2. Press . 3. Dial the external number. 4. Press ␣ to store the number. 5.
