User manual

100 Configuring Bluetooth wireless headsets

ATTENTION

Nortel recommends that you not pair more than one headset of the same model,

because they appear with identical names in the Paired list.

Prerequisites

Bluetooth wireless technology must be available for use on your phone.

Check with your administrator.

To perform this procedure, you need information provided with the headset

documentation.

•

You must put the Bluetooth technology headset in pairing or search

mode. For a Sony Ericsson HBH-662 Bluetooth earphone, the steps

are included in this procedure. For other headsets, refer to the headset

documentation or contact the vendor for this procedure.

• In the following procedure, step 7 requires you to enter the headset

PIN (sometimes called a passkey). You can find this information in the

headset documentation. Typically this value is 0000.

Step Action

1 Double press the In Calls key or, alternatively, complete the

following steps:

a Double-press the Services key

The Services menu is displayed.

b Select Preferences

The Preferences menu is displayed.

c Select Bluetooth Setup.

The Bluetooth Setup dialog box appears.

2 Ensure the Enable Bluetooth and Use Bluetooth Headset check

boxes are enabled.

3 Put your Bluetooth technology headset in its pairing or search

mode. If your headset is a Sony Ericsson HBH-662 Bluetooth

earphone, perform these steps (for other types, refer the

documentation provided with the headset):

a Turn the headset on by pressing the power key in the front

panel of the headset.

b Press and hold the plus (+) and minus (-) keys at the same

time until a searching mode picture/flash shows on the

earphone display.

4 Perform these steps to search for the paired headset:

a Select Search in the Bluetooth Setup screen.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 01.04 Standard

7 March 2008