User manual

ManualsBrandsNortel Networks ManualsIP phonesIP Phone 1150E

101

102

103

104

105

106

107

108

109

110

102 Configuring Bluetooth wireless headsets

perform the pairing and activation procedure, see “Pairing a

wireless headset with the IP Phone” (page 99).

--End--

Interaction with wired headsets

A Bluetooth wireless technology headset can work only when it is within

range of the IP Phone. When a wireless headset approaches the end of

its radio range, the audio quality degrades and radio interference noise

increases. When the wireless headset is in connecting range, the In Calls

key controls the wireless headset, even if a wired headset is attached. If a

wireless headset moves out of connecting range, a special beep sounds

in the headset indicating the connection is lost.

If you connect a Bluetooth wireless technology headset and a wired

headset to the same IP Phone, the two interact as follows:

• When a wireless headset is paired with the set, but is not in range, the

wired headset works as normal.

• You can select which headset the IP Phone uses, by checking the Use

Bluetooth Headset check box.

Switching between a wireless and a wired headset

Follow this procedure to disable the wireless headset, without losing the

pairing or disabling it.

If a Bluetooth wireless technology headset is connected, and you want

to use the wired headset, you can switch between the two. It is not

necessary to unpair or disable the wireless headset.

You can switch between a wired and wireless headset anytime. The IP

Phone does not have to be idle, and you do not have to be engaged in a

call.

Step Action

1 Double press the In Calls key or, alternatively, complete the

following steps:

a Double-press the Services key

The Services menu is displayed.

b Select Preferences

The Preferences menu is displayed.

c Select Bluetooth Setup.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 01.04 Standard

7 March 2008