User manual

Installing Power Supplies
308684-B Rev 00
3-21
For instructions, see “Removing an AC Power Module” on page 3-22.
5.
Grasp the handle of the replacement module with one hand and the
power supply handle with the other (Figure 3-13)
.
Figure 3-13. Removing or Installing an AC Power Module
6.
Using both hands, gently guide the new power supply module into the
desired slot along the side guides.
7.
Using a flat-tip screwdriver, tighten the captive screw until the power
module is seated firmly.
VRS0126A
A
B
Captive
screw
Power
supply handle
Power
supply handle
VERSARLAR Switch Router 15000