User manual

Installing and Maintaining the Versalar Switch Router 15000
4-14
308684-B Rev 00
Installing an Interface Card
You can install an interface card with the power on or off.
To install an interface card:
1.
Attach the antistatic wrist strap.
For instructions, see “Attaching the Antistatic Wrist Strap” on page 4-3
.
2.
Locate the slot where you want to install the interface card (Figure 4-9).
3.
If an interface card air flow module is installed in the slot, remove it.
Caution:
Electrostatic discharge can damage hardware. Attach the antistatic
wrist strap before handling any Versalar 15000 components.