User's Manual

Conﬁguring the dialing plan for PSTN access to SRG users in Normal Mode 49

•

Conﬁgure the NRS—see Procedure 4 "Conﬁguring the NRS database"

(page 57).

1. Access NRS Manager.

2. Select an endpoint.

3. Conﬁgure the Numbering Plan Entry for the branch ofﬁce.

•

At the branch ofﬁce—see Procedure 5 "Conﬁgur ing the branch ofﬁce"

(page 60).

1. Conﬁgure the Route List Index.

2. Conﬁgure ESN.

These steps can be done using overlays, as described in this section, or in

Element Manager and NRS Manager. See IP Peer Networking Installation

and Commissioning (NN43001-313) for more details.

Procedure 3

Conﬁguring the main ofﬁce

Step Action

Conﬁgure the ZACB property for the branch ofﬁce zone.

LD 117 Deﬁne the zone Access Code handling for the branch ofﬁce zone

Command

Description

CHG ZACB <zone> [ALL]|[<AC1|AC2> <AC1|AC2>]

Define the Access Codes used to modify local or long-distance

calls in the branch office to force all branch office calls to be

routed to the MG 1000B PSTN.

The ZACB and ZDP properties are used to conﬁgure the digit

manipulation behavior of the branch ofﬁce zone (see step 2).

The ZACB property speciﬁes which calls undergo digit manipulation.

The attribute can be conﬁgured in the following ways:

•

CHG ZACB <zone>

In this conﬁguration, dialing AC1 or AC2 does not trigger digit

manipulation. SRG user calls are treated exactly the same as

those for main ofﬁce users.

•

CHG ZACB <zone> ALL

In this conﬁguration, calls dialed with AC1 and calls dialed with

AC2 undergo zone-based digit manipulation. All SRG user calls

can then be routed to the SRG PSTN.

Nortel Communication Server 1000

Main Ofﬁce Conﬁguration Guide for SRG 50

NN43001-307 02.02 Standard

Release 5.0 3 December 2007