Server User Manual

ManualsBrandsNortel Networks ManualsServerNN43001-563

211

212

213

214

215

216

217

218

219

220

Conﬁgure IP Trunk 3.01 (and later) data 219

Prompt Response Description

GRP

Network Group number, where:

x=0–4

DNUM

Device Number for I/O ports, where:

x=0–15

PORT

Port number for MSDL card, where:

x=0–3

DES IP TRUNK 16 character designator is "IP TRUNK" Specific description

if more than one IP Trunk 3.01 (and later) route exists.

...

USR User.

ISLD Dedicated Mode ISDN Signaling Link.

IFC Interface type for D-channel:

SL1 Meridian Customer Defined Network (MCDN)

ESGF ESIG interface with GF platform (QSIG)

ISGF ISIG interface with GF platform (QSIG)

The ESGF and ISGF responses are allowed if the QSIG

and QSIG GF packages are both equipped.

The IFC entry must match the protocol entered in TM 3.1

(and later) Node Properties, Card Configuration, Protocol

pull-down menu.

ISLM

xxx

Integrated Service Signaling Link Maximum CHIDs, where:

x = 1 – 382

ISLM is the maximum number of ISL trunks controlled by

the D-channel. There is no default value.

BPS (64000) 64000 is the default and is required for the IP Trunk 3.01

(and later) DCHIP.

PARM (RS422 DTE) The RS-422 parameters are established with switch

settings on the MSDL card. This prompt is used to verify

those settings prior to enabling the card.

RCAP Remote Capabilities

ND2 Network Name Display type 2 signaling. All nodes must

use same RCAP.

...

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007