Server User Manual

272 Install and conﬁgure IP Trunk 3.01 (and later) node

Figure 62

esn5PreﬁxShow

At the ITG prompt, enter >esn5PreﬁxSet "1xx" where xx = the NCOS

value. In Figure 63 "esn5PreﬁxSet" (page 272), the default value

was changed from NCOS 00 to 03.

Figure 63

esn5PreﬁxSet

—End—

Check and download IP trunk card software in TM 3.1

Follow the steps in Procedure 35 "Checking the IP trunk cards software

version" (page 272) to check the software version of the IP tr unk cards in

a new IP Trunk 3. 0 node. All cards must have same version. To ensure

proper IP Trunk 3.01 (and later) network operation, Nortel recommends that

all network nodes have the same software version. Verify that the software

release on each card is the latest recommended software release for IP

Trunk 3.01 (and later) by connecting to a Nortel website that contains the

latest software versions for the Media Card 32-port and the ITG-Pentium

24-port trunk card.

Procedure 35

Checking the IP trunk cards software version

Step Action

From the IP Telephony Gateway - ISDN IP Trunk window, click

the new node.

For each card in the node, starting with Leader 0, double-click the

card entry in the lower half of the window. The Card Properties

window appears.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007