Server User Manual

344 TM 3.1 OA and M using TM 3.1 applications
"System commands LD 32" (page 362)
"Disable the indicated IP trunk card" (page 363)
"Disable the indicated IP trunk card when idle" (page 363)
"Enable an indicated IP trunk card" (page 364)
"Disable an indicated IP trunk card port" (page 364)
"Enable an indicated IP trunk card port" (page 364)
"Display IP trunk card ID information" (page 364)
"Display IP trunk card status" (page 364)
"Display IP trunk card port status" (page 364)
Introduction
This chapter explains how to perform IP Trunk 3.01 (and later) Operation,
Administration and Maintenance (OA&M) tasks using TM 3.1 Navigator,
Maintenance windows and System Terminal Passthru, the TM 3.1 Alarm
Notification application, and the TM 3.1 ITG ISDN IP Trunks application.
Most OA&M tasks are performed from TM 3.1. A few OA&M tasks must be
performed through the ITG shell ("OA and M using the ITG shell CLI and
overlays" (page 367)) If TM 3.1 is temporarily unavailable, many OA&M
tasks can be performed from the ITG shell as an alternative method.
TM 3.1 OA and M procedure summary
•
"Delete a node" (page 345)
•
"Database locking" (page 346)
• "ITG Card Properties window" (page 347)
•
"Transmit configuration data" (page 350)
•
"Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrieving an
existing node" (page 353)
•
"Retrieve and add an IP Trunk 3.01 (and later) node for maintenance
and diagnostic purposes" (page 355)
•
"Retrieve IP Trunk 3.01 (and later) configuration information from the IP
Trunk 3.0 (and later) node" (page 357)
•
"Schedule and generate and view IP Trunk 3.01 (and later) OM reports"
(page 358)
•
"Backup and restore operations" (page 361)
•
"Alarm Notification" (page 361)
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.