Server User Manual

364 TM 3.1 OA and M using TM 3.1 applications
DISI l s c
Disable the indicated IP trunk card
when idle, where: l = loop,
s = shelf, c = card
Enable an indicated IP trunk card
To enable an indicated IP trunk card in LD 32, use the following command:
ENLC l s c
Enable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card
Disable an indicated IP trunk card port
To disable an indicated IP trunk card port in LD 32, use the following
command:
DISU l s c u
Disable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card, u = unit
Enable an indicated IP trunk card port
To enable a indicated IP trunk card port in LD 32, use the following
command:
ENLU l s c u
Enable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card
Display IP trunk card ID information
To display the IP trunk card ID in LD 32, use the following command:
IDC l s c
Display the card ID for the IP trunk
card, where: l = loop,
s = shelf, c = card
Display IP trunk card status
To display the status of a indicated IP trunk card in LD 32, use the following
command:
STAT l s c
Display the status of the indicated
IP trunk card, where: l = loop,
s = shelf, c = card
Display IP trunk card port status
To display the status of a port on the IP trunk card in LD 32, use the
following command:
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.