Server User Manual

Access the ITG shell through a maintenance port or Telnet 371

Figure 147

Select card and open Telnet session

Perform the following action to increase the Telnet terminal buffer

size to capture multiple screens of data from the IP trunk card:

From the Telnet "Terminal" menu, select "Preferences". Set the

Buffer Size to a larger value, such as 1000, and click "OK". The

Telnet buffer size has to be only once, because Telnet preferences

are automatically saved.

To prevent the loss of diagnostic data from the IP trunk card if the

Telnet session terminates unexpectedly, enable logging of Telnet

sessions on the TM 3.1 PC:

From the Telnet "Terminal" menu, select "Start Logging". Use the

"Browse" dialog to choose the appropriate folder and ﬁle name for

Telnet log ﬁle for the current Telnet session. Open the Telnet log ﬁle

using a text editor, such as Windows Notepad, or a word processor

for large log ﬁles.

—End—

Change the default ITG shell password to maintain access security

Schedule routine changes of user names and passwords to maintain access

security. The ITG user name and password protects the maintenance port,

FTP, and Telnet access to the IP trunk card over the LAN.

Follow the steps in Procedure 62 "Changing the default ITG shell password"

(page 372) to change the default ITG shell password.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007