Server Hardware Installation Instructions

56 Chapter 5 Installing the ser ver and connecting the peripheral devices

—End—

To start the server

Step Action

1 Press the server power switch to start the server.

Observe the Power-On Self Test (POST) and initialization messages

on the monitor.

3 Let the mini-setup sequence run until you are prompted to login

to the operating system.

Note: The system may perform multiple reboots. This is normal.

Ensure that the operating system logon window appears on the

monitor.

Note: If the logon window does not appear, refer to the 1002rp

Server Maintenance and Diagnostics (NN44200-701) guide for

troubleshooting instructions.

—End—

Nortel CallPilot

1002rp Server Hardware Installation

NN44200-300 01.01 Standard

5.0 23 February 2007