Switch User Manual

106 IP Routing Configuration and Management
The ip vrrp address command is executed in the Interface
Configuration mode.
no ip vrrp address command
The no ip vrrp address command is used to delete the association of
an IP address with a virtual router ID.
The syntax of the no ip vrrp address command is:
no ip vrrp address <vr_id> <ip_address>
The <vr_id> parameter represents the virtual router being configured.
This is a value between 1 and 255. The <ip_address> parameter
represents the address to be used in the association.
The no ip vrrp address command is executed in the Interface
Configuration mode.
ip vrrp action command
The ip vrrp action command is used to define the action this interface
will take when a holddown timer threshold has been reached.
The syntax of the ip vrrp action command is:
ip vrrp action <vr_id> {none | preempt}
The <vr_id> parameter represents the virtual router being configured. If
none is selected as the action, no action is taken when a holddown timer
threshold is reached. If preempt is selected as the action, the holddown
timer is cancelled.
The ip vrrp action command is executed in the Interface Configuration
mode.
ip vrrp adver-int command
The ip vrrp adver-int command is used to set the VRRP
advertisement interval.
The syntax of the ip vrrp adver-int command is:
ip vrrp <vr_id> adver-int <interval>
The <vr_id> parameter represents the virtual router being configured. The
<interval> parameter represents the advertisement interval in seconds.
This is an integer value between 1 and 255.
The ip vrrp adver-int command is executed in the Interface
Configuration mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.