Switch User Manual

108 IP Routing Conﬁguration and Management

The no ip vrrp critical-ip command is executed in the Interface

Conﬁguration mode.

ip vrrp critical-ip-addr command

The ip vrrp critical-ip-addr command is used to set the IP

address used with the VRRP critical IP functionality.

The syntax of the ip vrrp critical-ip-addr command is:

ip vrrp <vr_id> critical-ip-addr <ip_address>

The <vr_id> parameter represents the virtual router being conﬁgured. The

<ip_address> parameter represents the IP address to be used.

The ip vrrp critical-ip-addr command is executed in the Interface

Conﬁguration mode.

ip vrrp enable command

The ip vrrp enable command is used to enable the virtual router.

The syntax of the ip vrrp enable command is:

ip vrrp <vr_id> enable

The <vr_id> parameter represents the virtual router being conﬁgured.

The ip vrrp enable command is executed in the Interface Conﬁguration

mode.

no ip vrrp enable command

The no ip vrrp enable command is used to disable the virtual router.

The syntax of the no ip vrrp enable command is:

no ip vrrp <vr_id> enable

The <vr_id> parameter represents the virtual router being conﬁgured.

The no ip vrrp enable command is executed in the Interface

Conﬁguration mode.

ip vrrp fast-adv command

The ip vrrp fast-adv command is used to enable the VRRP fast

advertisement functionality.

The syntax of the ip vrrp fast-adv command is:

ip vrrp <vr_id> fast-adv enable

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007