Switch User Manual

IP routing conﬁguration using the CLI 109

The <vr_id> parameter represents the virtual router being conﬁgured.

The ip vrrp fast-adv command is executed in the Interface

Conﬁguration mode.

no ip vrrp fast-adv command

The no ip vrrp fast-adv command is used to disable the VRRP fast

advertisement functionality.

The syntax of the no ip vrrp fast-adv command is:

no ip vrrp <vr_id> fast-adv enable

The <vr_id> parameter represents the virtual router being conﬁgured.

The no ip vrrp fast-adv command is executed in the Interface

Conﬁguration mode.

ip vrrp fast-adv-int command

The ip vrrp fast-adv-int command is used to set the interval used in

the VRRP fast advertisement functionality.

The syntax of the ip vrrp fast-adv-int command is:

ip vrrp <vr_id> fast-adv-int <interval>

The <vr_id> parameter represents the virtual router being conﬁgured. The

<interval> parameter represents the fast advertisement interval. This is

a value in milliseconds between 200 and 1000.

The ip vrrp fast-adv-int command is executed in the Interface

Conﬁguration mode.

ip vrrp holddown-timer command

The ip vrrp holddown-timer command is used to set the VRRP

holddown timer.

The syntax of the ip vrrp holddown timer command is:

ip vrrp <vr_id> holddown-timer <timer_value>

The <vr_id> parameter represents the virtual router being conﬁgured. The

<timer_value> parameter represents the holddown timer value. This is a

value in seconds between 0 and 21600.

The ip vrrp holddown-timer command is executed in the Interface

Conﬁguration mode.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007