Manualshelf

Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503
111112113114115116117118119120
IP routing configuration using the CLI 111
The <path_count> parameter represents the number of ECMP paths
allotted. This is a value between 1 and 4. The default is 1.
The rip maximum-path command is executed in the Global Configuration
mode.
ospf maximum-path command
The ospf maximum-path command is used to configure the number of
ECMP paths allotted for the Open Shortest Path First (OSPF) protocol.
The syntax of the ospf maximum-path command is:
ospf maximum-path <path_count>
The <path_count> parameter represents the number of ECMP paths
allotted. This is a value between 1 and 4. The default is 1.
The ospf maximum-path command is executed in the Global
Configuration mode.
maximum-path command
The maximum-path command is used to configure the number of ECMP
paths allotted to static routes.
The syntax of the maximum-path command is:
maximum-path <path_count>
The <path_count> parameter represents the number of ECMP paths
allotted. This is a value between 1 and 4. The default is 1.
The maximum-path command is executed in the Global Configuration
mode.
show ecmp command
The show ecmp command is used to display ECMP path information.
The syntax of the show ecmp command is:
show ecmp
The show ecmp command is executed in the User EXEC Configuration
mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.