Switch User Manual

118 IP Routing Conﬁguration and Management

The following table describes the parameters for this command.

ip dhcp-relay fwd-path disable parameters

Parameter Description

<A.B.C.D> Enter the IP address of the DHCP agent on the

forwarding path to be disabled.

<O.P.Q.R> Enter the IP address of the DHCP server on the

forwarding path to be disabled.

The ip dhcp-relay fwd-path disable command is executed in the

Global Conﬁguration command mode.

The DHCP relay feature is enabled by default.

no ip dhcp-relay fwd-path command

The no ip dhcp-relay fwd-path command removes the speciﬁed

DHCP forwarding path globally on the Nortel Ethernet Routing Switch 5500

Series.

The syntax for the no ip dhcp-relay fwd-path command is:

no ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R>

The following table outlines the parameters for this command.

no ip dhcp-relay fwd-path parameters

Parameter Description

<A.B.C.D> Enter the IP address of the DHCP agent on the

forwarding path to be removed.

<O.P.Q.R> Enter the IP address of the DHCP server on the

forwarding path to be removed.

The no ip dhcp-relay fwd-path command is executed in the Global

Conﬁguration command mode.

show vlan dhcp-relay command

The show vlan dhcp-relay command displays the current DHCP relay

forward path conﬁguration for each VLAN on the Nortel Ethernet Routing

Switch 5500 Series.

The syntax for the show vlan dhcp-relay command is:

show vlan dhcp-relay [<1-4094>]

Substitute <1-4094> above with the VLAN ID of the VLAN to be displayed.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007