Switch User Manual

124 IP Routing Configuration and Management
5530-24TFD(config-if)# ip rip default-supply enable
6
Enable Default Route Listen to add a default route to the route table,
if advertised from another router.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip default-listen enable
7
Add the In or Out Route Policy.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip out-policy map1
8
Enable Triggered Updates, if required.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip triggered enable
9
Configure the cost of the link by entering a value of 1 to 15; where 1
is the default.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip cost 2
10
Configure send mode parameters.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# router rip enable
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip send version rip2
11
Configure receive mode parameters.
5530-24TFD# enable
5530-24TFD# config terminal
5530-24TFD(config)# router rip enable
5530-24TFD(config)# interface vlan 51
5530-24TFD(config-if)# ip rip receive version rip2
12
Enable poison reverse.
Note: RIP Split Horizon is enabled by default. By setting the
Poison parameter to true, Poison Reverse is enabled. If Poison
Reverse is enabled, the RIP updates sent to a neighbor from
which a route is learned are poisoned with a metric of 16.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.