Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503

121

122

123

124

125

126

127

128

129

130

126 IP Routing Conﬁguration and Management

Step Action

Conﬁgure tagging on ports 1/47 and 1/48. Tagging is required to

support multiple VLANs on the same interface.

5530-24TFD# enable

5530-24TFD# config terminal

5530-24TFD(config)# vlan ports 1/47-48 tagging tagAll

Conﬁgure ERS2 for VLAN 2 access.

a. Create a port-based VLAN (VLAN 2) using spanning tree group

1 and include ports 1/47 and 1/48 in VLAN 2.

5530-24TFD(config)# vlan create 2 name "VLAN-2" type

port

5530-24TFD(config)# vlan member add 2 port 1/47-48

b. Assign the IP address 10.1.20.2/24 to VLAN 2.

5530-24TFD(config)# interface vlan 2

5530-24TFD(config-if)# ip address 10.1.20.2

255.255.255.0

c. Enable RIP for VLAN 2 and disable RIP supply and listen. RIP

supply and listen are not required because no router is attached

to VLAN 2.

5530-24TFD(config)# interface vlan 2

5530-24TFD(config-if)# ip rip enable

5530-24TFD(config-if)# ip rip supply disable

5530-24TFD(config-if)# ip rip listen disable

Conﬁgure ERS2 for VLAN 3 access.

a. Create a port-based VLAN (VLAN 3) using spanning tree group

1 and include ports 1/47 and 1/48 in VLAN3.

5530-24TFD(config)# vlan create 3 name "VLAN-3" type

port

5530-24TFD(config)# vlan member add 3 port 1/47-48

b. Assign the IP address 10.1.30.2/24 to VLAN 3.

5530-24TFD(config)# interface vlan 3

5530-24TFD(config-if)# ip address 10.1.30.2

255.255.255.0

c. Enable RIP for VLAN 3 and disable RIP supply and listen. RIP

supply and listen are not required because no router is attached

to VLAN 3.

5530-24TFD(config)# interface vlan 3

5530-24TFD(config-if)# ip rip enable

5530-24TFD(config-if)# ip rip supply disable

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007