Switch User Manual

134 IP Routing Conﬁguration and Management

5530-24TFD(config)# route-map rip_pol_2 1 match

network Prefix_2

Add the Route Policy created in step 2 to both RIP core ports.

5530-24TFD(config)# interface FastEthernet 2/1

5530-24TFD(config-if)# brouter vlan 2091

subnet 10.1.1.14/30

5530-24TFD(config-if)# ip rip enable

5530-24TFD(config-if)#ip rip out-policy rip_pol_2

5530-24TFD(config)# interface FastEthernet 2/8

5530-24TFD(config-if)# brouter vlan 2090

subnet 10.1.1.6/30

5530-24TFD(config-if)# ip rip enable

5530-24TFD(config-if)# ip rip out-policy rip_pol_2

—End—

Open Shortest Path First (OSPF) conﬁguration

This section contains examples of common OSPF-related conﬁguration

tasks.

The Nortel Ethernet Routing Switch 5500 Series supports the following

OSPF standards:

•

RFC 2328 (OSPF version 2)

• RFC 1850 (OSPF Management Information Base)

•

RFC 2178 (OSPF MD5 cryptographic authentication)

This section provides examples of the common OSPF conﬁguration tasks

and includes the CLI commands used to create the conﬁguration.

conﬁguring an IP OSPF interface

An OSPF interface can be conﬁgured on a brouter port or on a VLAN. The

following section demonstrates the creation of the example OSPF interface

illustrated below.

OSPF interface example topology

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007