Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503

141

142

143

144

145

146

147

148

149

150

144 IP Routing Conﬁguration and Management

5530-24TFD(config)# interface vlan 100

5530-24TFD(config-if)# ip rip receive version rip2

send version rip2

c. Conﬁgure the OSPF interface on R1.

Conﬁgure port 2/6 as a brouter port in VLAN 200.

5530-24TFD(config)# interface fast 2/6

5530-24TFD(config-if)# brouter port 2/6 vlan 200

subnet 10.1.1.18/30

d. Enable OSPF on R1.

Conﬁgure R1 as an ASBR, assign OSPF Router-ID 1.1.1.5,

create OSPF NSSA area 2, add the OSPF interface 10.1.1.18 to

area 2, and enable OSPF on the interface.

5530-24TFD(config)# router ospf

5530-24TFD(config-router)# as-boundary-router enable

5530-24TFD(config-router)# router-id 1.1.1.5

5530-24TFD(config-router)# area 0.0.0.2 import nssa

5530-24TFD(config-router)# network 10.1.1.18 area

0.0.0.2

5530-24TFD(config)# router ospf enable

e. Conﬁgure a route policy to distribute Direct and OSPF to RIP.

Create a route policy named Rip_Dist that distributes directly

connected and OSPF routes into RIP.

5530-24TFD(config)# route-map Rip_Dist permit 1

enable match protocol direct,ospf set metric-type

type1

f. Apply the Rip_Dist route policy to RIP Out Policy.

5530-24TFD(config)# interface vlan 100

5530-24TFD(config-if)# ip rip out-policy Rip_Dist

g. Conﬁgure OSPF route distribution to distribute RIP routes as

AS-external LSA type 1.

5530-24TFD(config)# router ospf

5530-24TFD(config-router)# redistribute rip enable

metric-type type1

5530-24TFD(config)# ip ospf apply redistribute rip

—End—

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007