Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503

191

192

193

194

195

196

197

198

199

200

200 IP Routing Conﬁguration and Management

5530-24TFD# config terminal

5530-24TFD(config)# router ospf enable

5530-24TFD(config)# router ospf

5530-24TFD(config-router)# network 10.1.20.3

f. Conﬁgure VRRP VIP address for VLAN 2 on R2

5530-24TFD# config terminal

5530-24TFD(config)# router vrrp ena

5530-24TFD(config)# interface vlan 2

5530-24TFD(config-if)# ip vrrp address 1 10.1.20.1

5530-24TFD(config-if)# ip vrrp 1 enable

5530-24TFD(config-if)# ip vrrp 1 backup-master

enable

Note: Fast Advertisement is disabled by default. Fast

advertisement is proprietary to Nortel to support an

advertisement interval from 200 to 1000 milliseconds (ms)

with a default of 200. If fast VRRP advertisement is desired,

enable fast advertisement.

—End—

Conﬁguration command listing This following list is a complete

sequence of the commands used in this conﬁguration:

1. Conﬁguration for R1

#MLT CONFIGURATION #

config t

mlt 1 member 2/1-2/2

mlt 1 ena

vlan port 2/2-2/2 tagging enable

interface mlt 1

ist enable peer-ip 2.1.1.2 vlan 3999

mlt 2 member 1/48,1/47

mlt 2 enable

interface mlt 2

smlt 1

#VLAN CONFIGURATION #

config t

vlan members remove 1 1/47-1/48,2/1-2/2

vlan create 2 type port

vlan members remove 2 1/1-1/46,2/3-2/8,3/1-3/8

vlan members add 2 1/47-1/48,2/1-2/2

interface vlan 2

ip address 10.1.20.2 255.255.255.0

router ospf enable

router ospf

network 10.1.20.2

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007