Switch User Manual

202 IP Routing Conﬁguration and Management

mlt spanning-tree 2 stp all learning disable

Conﬁguring VRRP with SLT

The following illustration and conﬁguration ﬁle examples demonstrate a

VRRP conﬁguration with SLT.

VRRP with SLT conﬁguration

The following commands would recreate the above conﬁguration:

1. Conﬁguration for R1

#MLT CONFIGURATION #

config t

mlt 1 member 2/1-2/2

mlt 1 enable

vlan port 2/2-2/2 tagging enable

interface mlt 1

ist enable peer-ip 2.1.1.2 vlan 3999

interface fast-Ethernet 1/48

smlt 1

#VLAN CONFIGURATION #

config t

vlan members remove 1 1/48,2/1-2/2

vlan create 2 type port

vlan members remove 2 1/1-1/47,2/3-2/8,3/1-3/8

vlan members add 2 1/47,2/1-2/2

interface vlan 2

ip address 10.1.20.2 255.255.255.0

router ospf enable

router ospf

network 10.1.20.2

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007