Switch User Manual

IP routing configuration using the Java Device Manager 213
2
Using the fields provided, set the filter for the tab. These fields are
described in the following table.
Filter dialog fields
Field Description
Condition When using multiple filter expressions on the
tab, this is the condition that is used to join
them together.
Ignore Case Denotes whether filters are case sensitive or
insensitive.
Column Denotes the type of criteria that will be applied
to values used for filtering.
All Records Select this check box to clear any filters and
display all rows.
Dest Select this check box and enter a value to filter
on the route destination value.
Mask Select this check box and enter a value to filter
on the route destination subnet mask value.
NextHop Select this check box and enter a value to filter
on the route next hop value.
HopOrMetric Select this check box and enter a value to filter
on the hop count or metric of the route.
Interface Select this check box and enter a value to filter
on the route’s associated interface.
Proto Select this check box and enter a value to filter
on the route protocol.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.