Switch User Manual

218 IP Routing Configuration and Management
5
Select true to enable ARP Inspection-VLAN or falseto disable ARP
Inspection-VLAN.
6
Click Apply.
—End—
ARP Inspection port tab
To view and change ARP inspection status for ports, use the following
procedure:
Step Action
1
From the Device Manager, select IP Routing > IP. The IP window
appears.
2
Select the ARP Inspection-port tab. The ARP Inspection-port
window appears.
ARP Inspection-port tab
3
To change the ARP Inspection status for a port, select the port.
4
Double click the ArpInspectionIfTrusted field for the port.
5
Select true enable ARP Inspection or falseto disable ARP
Inspection.
6
Click Apply.
—End—
Note: ArpInspectionIfTrusted controls whether or not the interface is
trusted for ARP inspection.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.