Switch User Manual

IP routing conﬁguration using the Java Device Manager 221

Step Action

Open the IP screen by selecting IP Routing > IP from the menu.

Select the UDP Listeners tab. This tab is illustrated below.

UDP Listeners tab

Click Refresh to immediately refresh the information displayed.

The following table outlines the ﬁelds on this tab.

UDP Listeners tab ﬁelds

Field Description

LocalAddress The local IP address for this UDP listener.

In the case of a UDP listener that accepts

datagrams for any IP interface associated with

the node, the value 0.0.0.0 is used.

LocalPort The local port number for this UDP listener.

—End—

ECMP tab

The ECMP tab is used to conﬁgure the Equal Cost Multipath (ECMP)

feature on the switch.

To conﬁgure ECMP, use the following procedure:

Step Action

Select IP Routing > IP from the Device Manager menu. The IP

dialog opens with the Globals tab selected

Select the ECMP tab. This tab is illustrated below.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007