Switch User Manual

226 IP Routing Conﬁguration and Management

DefaultListen Determines whether this interface listens for

default route advertisements.

TriggeredUpdate Enables or disables triggered updates on this

interface.

AutoAggregate Enables or disables auto aggregation on this

interface.

InPolicy Associates a previously conﬁgured switch policy

with this interface for use as an in policy.

OutPolicy Associates a previously conﬁgured switch policy

with this interface for use as an out policy.

Cost The cost associated with this interface.

HoldDownTime Sets the holddown timer for this interface. This is

an integer value in seconds between 0 and 360.

TimeoutInterval Sets the timeout interval for this interface. This is

an integer value between 15 and 259200.

ProxyAnnounceFlag Enables or disables proxy announcements on this

interface.

Click Apply.

—End—

RIP Statistics

The Stats tab provides statistical information about the currently conﬁgured

RIP interfaces. To view these RIP statistics, follow this procedure:

Step Action

Select IP Routing > RIP from the Device Manager menu. The RIP

dialog opens with the Globals tab selected.

Select the Stats tab. This tab is illustrated below.

Stats tab

RIP statistics for the conﬁgured interfaces are displayed. The ﬁelds

on this tab are outlined in the following table.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007