Switch User Manual

228 IP Routing Conﬁguration and Management

IP VLAN screen - RIP tab

Using the provided ﬁelds, conﬁgure the interface RIP parameters.

These ﬁelds are outlined in the following table.

RIP tab ﬁelds

Field Description

Poison Determines whether or not poison reverse is

implemented on this interface.

DefaultSupply Determines whether or not the interface

implements the default supply mechanism.

DefaultListen Determines whether or not the interface

implements the default listen mechanism.

AutoAggregateEnable Determines whether or not auto aggregation is

enabled on this interface.

AdvertiseWhenDown Determines whether or not this interface will

advertise even when non-operational.

Cost The cost associated with this interface.

Click Apply.

—End—

Open Shortest Path First (OSPF) conﬁguration

The Open Shortest Path First (OSPF) Protocol is an Interior Gateway

Protocol (IGP) that distributes routing information between routers belonging

to a single autonomous system (AS). Intended for use in large networks,

OSPF is a link-state protocol which supports IP subnetting and the tagging

of externally-derived routing information.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007