Switch User Manual

IP routing configuration using the Java Device Manager 229
This section describes the configuration of OSPF on the switch using the
Java Device Manager.
Global OSPF configuration
The General tab of the OSPF dialog is used to configure global OSPF
parameters. To configure these parameters, use the following procedure:
Step Action
1
Select IP Routing > OSPF from the Device Manager menu. The
OSPF dialog will open with the General tab selected. This tab is
illustrated below.
OSPF dialog - General tab
2
Using the fields provided, configure the global OSPF parameters.
These fields are described in the following table.
General tab fields
Field Description
RouterId The unique ID of the router in the Autonomous
System.
AdminStat The administrative status of OSPF on the
router.
VersionNumber The current OSPF version number.
AreaBrdRtrStatus Denotes whether this router is an Area
Border Router.
ASBrdRtrStatus Denotes whether this router is an
Autonomous System Border Router.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.