Switch User Manual

244 IP Routing Configuration and Management
3
Check the AutoVirtLinkEnable box.
4
Click Apply.
5
Enter the router ID in the RouterId box for the other end point ABR.
6
Check the AutoVirtLinkEnable box.
7
Click Apply.
—End—
Automatic Virtual Link Deletion
To delete an automatic Virtual Link use the following procedure.
Deleting an automatic Virtual Link
Step Action
1
From the Device Manager main menu, select IP Routing > OSPF.
The OSPF dialog opens.
2 On the General tab, enter the router ID in the RouterId box for one
of the end point ABRs.
3
Deselect the AutoVirtLinkEnable box.
4 Click Apply.
5
Enter the router ID in the RouterId box for the other end point ABR.
6
Deselect the AutoVirtLinkEnable box.
7
Click Apply.
—End—
Automatic Virtual Links are also removed when the transit area is deleted or
when the router is no longer an ABR.
Virtual neighbors information
Use the Virtual Neighbors tab of the OSPF dialog to view virtual neighbor
information.
Use the following procedure to view OSPF Virtual Neighbors information:
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.