Switch User Manual

IP routing configuration using the Java Device Manager 255
2
Click Insert.
3
The Insert Redistribute dialog opens. This dialog is illustrated
below.
Insert Redistribute dialog
4
Using the fields provided, create the new redistribution entry. These
fields are described in the following table.
Insert Redistribute dialog fields
Field Description
RouteSource This field indicates that the protocol is either
interested or not interested in knowing the routes
learned from this source.
Enable Indicates whether the redistribution entry is active.
Metric A value between 0 and 65535 that indicates the
metric to be announced in the advertisement.
MetricType The field specifies the metric type. The value
type1 is treated as an internal metric and type2
is treated as an external metric.
Subnets This field indicates whether subnetworks need to
be advertised individually. Options available are:
allow and supress.
RoutePolicy The name of an existing switch policy that will be
used to determine whether a specific route should
be advertised to a given protocol.
5
Click Insert.
—End—
Redistribution deletion
To delete a redistribution entry, use the following procedure.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.