Switch User Manual

IP routing conﬁguration using the Java Device Manager 269

SetMetricType Applicable to OSPF protocol only. If conﬁgured,

sets the metric type for the routes to be

announced into the OSPF routing protocol that

matches this policy. The default is type 2. This

ﬁeld is applicable only for OSPF announce

policies.

SetInjectNetList If conﬁgured, the switch replaces the destination

network of the route that matches this policy with

the contents of the speciﬁed preﬁx list.

SetMask Indicates the mask to used for routes that pass

the policy matching criteria.

Click Apply.

—End—

Route Policy creation

To create a new route policy, follow this procedure:

Step Action

Select IP Routing > Policy from the Device Manager menu. The

Policy dialog will open with the Preﬁx List tab selected. Select the

Route Policy tab. This tab is illustrated above.

2 Click Insert.

The Insert Route Policy dialog opens. This dialog is illustrated

below.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007