Switch User Manual

270 IP Routing Conﬁguration and Management

Insert Route Policy dialog

Using the ﬁelds provided, create the new route policy. These ﬁelds

are described in the following table.

Insert Route Policy ﬁelds

Field Description

Id The index value used to uniquely identify a

group of policies.

SequenceNumber The secondary index value assigned to

individual policies inside a larger policy group.

Name The name associated with this policy.

Enable Indicates whether the policy is enabled.

Disabled policies should be used for routing.

Mode Speciﬁes the action to be taken when this

policy is selected for a speciﬁc route. A value

of permit indicates that the route will be used

while deny indicates that the route will be

ignored.

MatchProtocol Select the appropriate protocol (RIP, Static,

Direct, OSPF or Any). If conﬁgured, matches

the protocol through which the route is

learned. This ﬁeld is used only for RIP

announce purposes.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007