Switch User Manual

272 IP Routing Conﬁguration and Management

SetMetric If conﬁgured, the switch sets the metric

value for the route while announcing or

redistributing. The default-import-metric is 0.

If the default is conﬁgured, the original cost of

the route is advertised into OSPF; for RIP, the

original cost of the route or the default value

is used.

SetMetricType Applicable to OSPF protocol only. If

conﬁgured, sets the metric type for the routes

to be announced into the OSPF routing

protocol that matches this policy. The default

is type 2. This ﬁeld is applicable only for

OSPF announce policies.

SetInjectNetList If conﬁgured, the switch replaces the

destination network of the route that matches

this policy with the contents of the speciﬁed

preﬁx list.

SetMask Indicates the mask to used for routes that

pass the policy matching criteria.

Click Insert.

—End—

Route policy deletion

To delete a route policy, use the following procedure.

Deleting a route policy

Step Action

From the Device Manager main menu, select IP Routing. The IP

Routing menu appears.

Select Policy. The Policy dialog opens.

Select the Route Policy tab.

Select an Id to delete.

Click Delete.

—End—

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007