Switch User Manual

278 IP Routing Conﬁguration and Management

NotiﬁcationCntl Indicates whether the VRRP-enabled router

generates Simple Network Management

Protocol (SNMP) traps based on VRRP

events:

•

Enabled - SNMP traps are sent.

•

Disabled - SNMP traps are not sent.

PingVirtualAddrEnabled Indicates whether this device should respond

to pings directed to a virtual router’s IP

address.

Click Apply.

—End—

VRRP interface creation

The Interface Address tab of the VRRP dialog is used to create new VRRP

interfaces. Conﬁguration and management of these interfaces is performed

on the Interfaces tab.

To create new VRRP interfaces, use the following procedure:

Step Action

Select IP Routing > VRRP from the Device Manager menu. The

VRRP dialog opens with the Globals tab selected. Select the

Interface Address tab. This tab is illustrated below.

VRRP dialog - Interface Address tab

Click Insert.

The Insert Interface Address dialog opens. This dialog is illustrated

below.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007