Switch User Manual

IP routing configuration using the Java Device Manager 281
AdminState Indicates the administrative status of the
virtual router.
Priority Indicates the priority to be used for the
virtual router master election process.
This is an integer value between 1 and
255. The priority value for the VRRP
router that owns the IP addresses
associated with the virtual router must be
255. The default priority value for VRRP
routers backing up a virtual router is 100.
MasterIpAddr Indicates the master router’s real
(primary) IP address. This is the IP
address listed as the source in the
VRRP advertisement last received by
this virtual router.
AdvertisementInterval Indicates the time interval, in seconds,
between transmission of advertisement
messages. Only the master router sends
VRRP advertisements. This is an integer
value between 1 and 255. The default
value is 1.
VirtualRouterUpTime Indicates the amount of time this virtual
router has spent out of the initialize
state.
HolddownTimer The amount of time (in seconds) to wait
before preempting the current VRRP
master. This is an integer value between
0 and 21600.
HoldDownState The holddown state of this VRRP
interface.
HoldDownTimeRemaining The amount of time (in seconds) left
before the holddown timer will expire.
Action Used to trigger an action on this VRRP
interface. Options available are: none
(no action) or preemptHoldDownTimer.
CriticalIpAddrEnabled Indicates whether the user-defined
critical IP address is enabled. If the
user-defined critical IP address is not
enabled, a default critical IP address of
0.0.0.0 will be used.
CriticalIpAddr The IP address of the interface that will
cause a shutdown event.
BackupMasterEnabled Indicates whether the backup/master
functionality is enabled on this interface.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.