Switch User Manual

IP routing configuration using the Java Device Manager 287
2
Select Edit > Port from the Device Manager menu. The Port dialog
opens with the Interface tab selected. Select the IP Address tab.
This tab is illustrated above.
3
Click Insert.
4
The Insert IP Address dialog opens. This dialog is illustrated below.
Insert IP Address dialog
5
Using the provided fields, create the new brouter port. These fields
are outlined in the following table.
Insert IP Address dialog fields
Field Description
IpAddress The IP address assigned to this brouter.
NetMask The subnet mask associated with the brouter
IP address.
VlanId The VLAN ID associated with this brouter port.
MacOffset The MAC address offset associated with this
brouter port.
6
Click Insert.
—End—
Note: Brouter ports are treated as routable VLANs and are displayed
on the Basic tab of the VLANs screen.
Deleting a Brouter port
To delete a brouter port, use the following procedure:
Step Action
1
Select a port on the Device Manager Front Panel view.
2
Select Edit > Port from the Device Manager menu. The Port dialog
opens with the Interface tab selected. Select the IP Address tab.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.