Switch User Manual

IP routing conﬁguration using the Java Device Manager 289

Using the provided ﬁelds, conﬁgure the new UDP protocol. These

ﬁelds are outlined in the following table.

Insert Protocols dialog ﬁelds

Field Description

PortNumber The port the new UDP protocol will use.

Name The name associated with the UDP protocol.

5 Click Insert.

—End—

UDP forwarding conﬁguration

The Forwardings tab of the UDP Forward dialog is used to assign a server

IP address to a previously conﬁgured protocol.

To conﬁgure a UDP forwarding, use the following procedure:

Step Action

Select IP Routing > UDP Forwarding from the Device Manager

menu. The UDP Forwarding dialog opens with the Protocols tab

selected. Select the Forwardings tab. This tab is illustrated below.

UDP Forward dialog - Forwardings tab

Click Insert.

The Insert Forwardings dialog opens. This dialog is illustrated

below.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007