Switch User Manual

IP routing conﬁguration using the Java Device Manager 293

Select an Id to delete.

Click Delete.

—End—

Conﬁguring UDP broadcast interfaces

The Broadcast Interfaces tab is used to assign a forwarding list to an

interface. The TTL for outgoing packets and the broadcast mask for

incoming packets are also added on this tab.

To conﬁgure the broadcast interface, use the following procedure:

Step Action

1 Select IP Routing > UDP Forwarding from the Device Manager

menu. The UDP Forwarding dialog opens with the Protocols tab

selected. Select the Broadcast Interfaces tab. This tab is illustrated

below.

UDP Forward dialog - Broadcast Interfaces tab

Using the provided ﬁelds, conﬁgure the broadcast interface. These

ﬁelds are outlined in the following table.

Broadcast Interface tab ﬁelds

Field Description

LocalIfAddr The IP address of the local interface.

UdpPortFwdListId The port forwarding lists associated with

the interface. This ID is deﬁned in the

Forwarding Lists tab.

MaxTtl Indicates the maximum number of hops

an IP broadcast packet can take from the

source device to the destination device.

This is an integer value between 1 and 16.

NumRxPkts The total number of UDP broadcast

packets received by this local interface.

NumFwdPkts The total number of UDP broadcast

packets forwarded.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007