Switch User Manual

294 IP Routing Configuration and Management
NumDropPktsDestUnreach The total number of UDP broadcast
packets dropped because the destination
was unreachable.
NumDropPktsUnknownPort The total number of UDP broadcast
packets dropped because the destination
port or protocol specified has no matching
forwarding policy.
BroadCastMask The subnet mask of the local interface
that is used for broadcasting the UDP
broadcast packets.
3 Click Apply.
—End—
UDP broadcast interface creation
To create a new broadcast interface, use the following procedure:
Step Action
1 Select IP Routing > UDP Forwarding from the Device Manager
menu. The UDP Forwarding dialog opens with the Protocols tab
selected. Select the Broadcast Interfaces tab. This tab is illustrated
above.
2
Click Insert.
3
The Insert Broadcast Interface dialog opens. This dialog is
illustrated below.
Insert Broadcast Interfaces dialog
4
Using the provided fields, create the new broadcast interface. These
fields are outlined in the following table.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.