Switch User Manual

300 IP Routing Configuration and Management
DHCP Bindings
—End—
The following table describes the fields in the DHCP Bindings window.
Field Description
VlanId Specifies the VLAN ID for the DHCP client..
MacAddress Specifies the VLAN MAC address for the DHCP client.
AddressType Specifies the type of address contained in the corresponding
binding address.
Address Specifies the IP address for the DHCP client.
Interface Specifies the interface to which the DHCP client is
connected.
LeaseTime(sec) Specifies the DHCP client binding lease time, in seconds.
IP Source Guard port
To view IP Source Guard status for ports, use the following procedure.
Step Action
1
From the Device Manager menu, select IP Routing > DHCP. The
DHCP Relay window appears.
DHCP Relay tab
2
Select the IP Source Guard-port tab. The IP Source Guard-port
window appears.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.