Switch User Manual

302 IP Routing Configuration and Management
Field Description
Port Specifies the IP Source Guard-enabled port number.
Type Specifies the port type.
Address Specifies the IP address allowed to communicate with the
port.
TIP: Up to 10 IP addresses are allowed on an IP Source
Guard-enabled port. Traffic from other addresses is
dropped.
Source Specifies the address source.
VLAN DHCP configuration
DHCP can also be configured for Layer 3 VLANs. To configure DHCP for a
Layer 3 VLAN, follow this procedure:
Step Action
1
Open the VLANs screen by selecting VLAN > VLANs from the JDM
menu.
2
Highlight the VLAN for which DHCP is to be configured.
3
Click IP. The IP VLAN screen opens. Select the DHCP tab. This tab
is illustrated below.
DHCP tab fields
The following table describes the DHCP tab fields.
DHCP tab fields
Fields Description
Enable
Specifies whether DHCP is enabled or
disabled.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.