Switch User Manual

54 IP Routing Configuration and Management
3
Log into the OSPF router configuration mode.
5530-24TFD(config)# router ospf
4
Enable ASBR functionality.
5530-24TFD(config-router)# as-boundary-router en
5
Use the following commands to select the type of routes that OSPF
will distribute to other OSPF devices. RIP, direct, and static routes
are supported.
5530-24TFD(config-router)# redistribute rip en
5530-24TFD(config-router)# redistribute direct en
5530-24TFD(config-router)# redistribute static en
6 Return to Global Configuration mode.
5530-24TFD(config-router)# exit
7 Once the commands in step 5 have be used to select the types of
routes to redistribute, apply the changes globally with the following
commands.
5530-24TFD(config)#ip ospf apply redistribute rip
5530-24TFD(config)#ip ospf apply redistribute direct
5530-24TFD(config)#ip ospf apply redistribute static
—End—
Configuring ECMP for OSPF
Usage of ECMP with OSPF is supported on the 5520 and 5530 models
only. To configure ECMP with OSPF, use the following procedure:
Step Action
1
Log into User EXEC mode.
5530-24TFD> enable
2
Log into Global Configuration mode.
5530-24TFD# config terminal
The switch will respond with the following line:
Enter configuration commands, one per line. End with
CNTL/Z.
3
Set the number of ECMP paths to use with OSPF. Up to four paths
can be used.
5530-24TFD(config)# ospf maximum-path 2
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.