Switch User Manual

60 IP Routing Configuration and Management
10.3.2.0 255.255.255.0 10.3.2.199 1 1
----
CDB
0
Total Routes: 3
TYPE Legend: I=Indirect Route, D=Direct Route, A=Alternative Route, B=Best Route, E=Ecmp
Route, U=Unresolved Route, N=Not in HW
The following table outlines the parameters for this command.
show ip route parameters
Parameter Description
<A.B.C.D> Enter IP address to display the route for the specific
IP address.
<W.X.Y.Z> Enter subnet mask address for the subnet to display.
summary
Display a summary of IP route information.
The show ip route command is executed in the User EXEC command
mode.
show ip route summary command
The show ip route summary command displays the software IP routing
table.
The syntax for the show ip route summary command is:
show ip route summary
show ip route summary command output
------------------------
Connected routes : 65
Static routes : 2
RIP routes : 512
OSPF routes : 512
------------------------
Total routes : 1091
------------------------
The show ip route summary command is executed in the User EXEC
command mode.
ip route command
The ip route command creates and configures a static route.
The syntax for the ip route command is:
ip route <A.B.C.D> <W.X.Y.Z> <O.P.Q.R> <1-65535>
The following table outlines the parameters for this command.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.