Switch User Manual

70 IP Routing Configuration and Management
no ip rip advertise-when-down command
The ip rip advertise-when-down command is used to disable RIP
advertisements on the interface being configured even when that interface
is not operational.
The syntax of the no ip rip advertise-when-down command is:
no ip rip advertise-when-down {enable}
The no ip rip advertise-when-down command is executed in the
Interface Configuration mode.
ip rip auto-aggregation command
The ip rip auto-aggregation command is used to enable auto
aggregation on the RIP interface. This allows for the automatic aggregation
of routes to their natural net mask when they are advertised on an interface
in a different class network.
The syntax of the ip rip auto-aggregation command is:
ip rip auto-aggregation {enable}
Auto aggregation is disabled by default.
The ip rip auto-aggregation command is executed in the Interface
Configuration mode.
no ip rip auto-aggregation command
The no ip rip auto-aggregation command is used to disable
auto-aggregation on the RIP interface.
The syntax of the no ip rip auto-aggregation command is:
no ip rip auto-aggregation {enable}
The no ip rip auto-aggregation command is executed in the
Interface Configuration mode.
ip rip cost command
The ip rip cost command is used to set the administrative path cost
of the interface.
The syntax of the ip rip cost command is:
ip rip cost <path_cost>
The <path_cost> parameter represents a value between 1 and 15.
The default path cost is 1.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.