Switch User Manual

IP routing configuration using the CLI 77
Use the interface key word to display RIP statistics by interface. Omission of
this key word displays general RIP information
The show ip rip command is executed in the Global Configuration mode.
default router rip command
The default router rip command is used to return the switch to the
default global RIP state (disabled).
The syntax of the default router rip command is:
default router rip enable
The default router rip command is executed in the Router
Configuration mode.
default default-metric command
The default default-metric command is used to return the switch
to the factory default RIP default import metric.
The syntax of the default default-metric command is:
default default-metric
The default default-metric command is executed in the Router
Configuration mode.
default timers basic holddown command
The default timers basic holddown command is used to return the
switch to the factory default RIP holddown timer.
The syntax of the default timers basic holddown command is:
default timers basic holddown
The default timers basic holddown command is executed in the
Router Configuration mode.
default timers basic timeout command
The default timers basic timeout command is used to return the
switch to the factory default RIP timeout timer.
The syntax of the default timers basic timeout command is:
default timers basic timeout
The default timers basic timeout command is executed in the
Router Configuration mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.