Manualshelf

Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503
71727374757677787980
IP routing configuration using the CLI 79
default ip rip cost command
The default ip rip cost command is used to restore the default RIP
costing settings for the interface.
The syntax of the default ip rip cost command is:
default ip rip cost [[out-policy <policy_name>] | [poison
enable] | [proxy-announce enable] | [receive <rip_version>]
| [send <rip_version>] | [supply enable] | [timeout] |
[triggered enable]]
The default ip rip cost command is executed in the Interface
Configuration mode.
default ip rip default-listen command
The default ip rip default-listen command is used to restore
the default RIP route listening setting for the interface (disabled).
The syntax of the default ip rip default-listen command is:
default ip rip default-listen enable
The default ip rip default-listen command is executed in the
Interface Configuration mode.
default ip rip default-supply command
The default ip rip default-supply command is used to restore
the default RIP route advertisement setting for the interface (disabled).
The syntax of the default ip rip default-supply command is:
default ip rip default-supply enable
The default ip rip default-supply command is executed in the
Interface Configuration mode.
default ip rip enable command
The default ip rip enable command is used to globally disable RIP
on the interface.
The syntax of the default ip rip enable command is:
default ip rip enable
The default ip rip enable command is executed in the Interface
Configuration mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.