Switch User Manual

80 IP Routing Conﬁguration and Management

default ip rip holddown command

The default ip rip holddown command is used to restore the default

RIP holddown setting for the interface.

The syntax of the default ip rip holddown command is:

default ip rip holddown

The default ip rip holddown command is executed in the Interface

Conﬁguration mode.

default ip rip in-policy command

The default ip rip in-policy command is used to delete the in

policy associated with this interface.

The syntax of the default ip rip in-policy command is:

default ip rip in-policy <policy_name>

The default ip rip in-policy command is executed in the Interface

Conﬁguration mode.

default ip rip listen command

The default ip rip listen command is used to set the ip r ip listen to

the default value which is enabled.

The syntax of the default ip rip listen command is:

default ip rip listen enable

The default ip rip listen command is executed in the Interface

Conﬁguration mode.

default ip rip out-policy command

The default ip rip out-policy command is used to delete the out

policy associated with this interface.

The syntax of the default ip rip out-policy command is:

default ip rip out-policy <policy_name>

The default ip rip out-policy command is executed in the

Interface Conﬁguration mode.

default ip rip poison command

The default ip rip poison command is used to disable RIP poison

reverse on the interface.

The syntax of the default ip rip poison command is:

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007